AvL 1030FA 1,0 m Militar Motorizado Tri-Banda Suelto de la Antena de la Banda Ka

AvL 1030FA Antena FlyAway de triple banda motorizada militar de 1,0 m 2 puertos Ka-band

IKtechcorp es el distribuidor para AVL Antanna Systems, un fabricante y proveedor líder de equipos satelitales comerciales. AVL Technologies ofrece una amplia gama de antenas utilizadas en las industrias VSAT, DTH, COTM, Teleport, Cable y Broadcast. Satélite, DTH, VSAT, Flyaway, implementación rápida, recibir sólo, RF, punto automático motorizado, antenas de vehículos
• Rx/Tx Feed: 2 puertos Ka-Band Military
- Recibir:
- Transmitir: 30.

Código: avl_1030fa_ka_mil

Llamar para preguntar el precio

Descripción

Especificaciones

Documentación

AvL 1030FA 1.0m Military Motorized Tri-Band FlyAway Antenna 2-port Ka-band

Summary

AvL 1030FA 1.0m Military Motorized Tri-Band FlyAway Antenna 2-port Ka-band
AvL's 1030FA positioner FlyAway Military antenna systems offer superior performance in a truly compact, lightweight and portable package. The 1.0m antenna systems are commercial airline checkable (two cases, each weighs <70 lbs) and can be flown or shipped anywhere, then set up and operational within minutes.

AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service
AvL 1030FA 1.0m SNG/Military Systems feature:
• Commercial airline checkable - packs into two cases, each weighs <70 lbs.
• Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation
• 1.0m segmented 6-piece AvL carbon fiber reflector with optional (1.2m) extender panels
• Rugged AvL Cable Drive Case-Based Positioner
• Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount
• Offset Prime Focus Highly Efficient Optics
• Available in Ku (precision or mode-match), X and Ka-band for commercial or military applications
• Motorized AvL Cable Drive for reliable positioning
• One button auto-acquisition controller
• Interfaces with all types of RF electronics and satellite services
• MIL-STD-188-164A Compliant
• 15-Minute Setup
While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram

Inquire

AvL 1030FA 1.0m Military Motorized Tri-Band FlyAway Antenna 2-port Ka-band

MECHANICAL SPECIFICATIONS

Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)

Polarization Drive System Motorized/Manual Options depending on feed

Reflector Construction 1.0m Segmented 6-Piece AvL Carbon Fiber Reflector
(optional 1.2m segmented 10-piece reflector)

Axis Travel ▼

Azimuth ±90° (CFE base dependent)

Elevation (reflector boresight) 7° - 100° (CFE base dependent)

Polarization ±95°

Az/El Speed: ▼

Slewing/Deploying (typical) Azimuth: 2°/sec Elevation: 1°/sec

Peaking (typical) Azimuth: 0.2°/sec Elevation: 0.2°/sec

Motors 24 VDC Variable Speed, Constant Torque

Standard Interfaces: ▼

BUC (& other CFE) Mounting Feed boom or behind reflector (additional CFE case or optional case required)

RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port

Electrical 30 ft. cable with connectors for controller

Electrical Interface Connectors on base

Transit Configuration (Ku-band): ▼ Case-Based

Case 1: Positioner & Feed 29.0” x 20.3” x 16.9” (< 70 lbs)

Case 2: Reflector, Boom, Controls 31.3” x 20.4” x 15.5” (< 70 lbs)

Set-up Time Less than 15 minutes.

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival 80 mph in zenith position

Wind - Operational: ▼

Without Anchoring 30 mph

With Anchoring 30 mph gusting to 45 mph

Pointing Loss in Wind: ▼

Ku-band 0.7 dB max (1.0m reflector)

Ka-band 2.0 dB max (1.0m reflector)

X-band 1.5 dB max (1.2m reflector with extender panels)

Temperature: ▼

Operational -22° to 125° F (-30° to 52° C)

Survival -40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS Receive Transmit

Feed Type ► Opt. 2-Port Ka (Military/WGS)

Frequency Range (GHz) 20.2 - 21.2 GHz 30.0 - 31.0 GHz

Polarization Configuration Circular or Linear

Gain (mid-band) @ Horn Interface (dBi) 44.6 dBi 47.9 dBi

-3dB Beamwidth (mid-band) 1.0° 0.7°

First Sidelobe Level (typical) -22 dB -25 dB

Antenna Noise Temperature (midband) 107° K @ 20.2 GHz

Radiation Pattern Compliance Per MIL-STD-188-164A

Maximum Feed Transmit (Tx) Power 250W

VSWR 1.30:1 1.30:1

G/T with 50˚ LNB, midband, clear horizon 21.1 dB/K with 100ºK LNB

Axial Ratio (CP only, within pointing cone ) 1.5 dB 1.0 dB

Port-to-Port Isolation – Tx to Rx 85 dB 85 dB (with filter)

CONTROLLER SPECIFICATIONS: STANDARD

Controller Type ► Std. Auto-Acquire with Opt. Ethernet IP Interface

Standard Feature ▼

Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)

User Interface Menu-driven display w/ keypad

Input Power 115/230 VAC (at rack); up to 200W

Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

Controller Type ► Opt. Enhanced Auto-Acquire with Ethernet IP Interface

Standard Feature ▼

Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)

User Interface Intelligent/simple GUI for on-board or remote CFE laptop

Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W

Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• Upgrade from 2-Port Precision Ku Feed to:
a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku;
b) 2-Port X MIL;
c) 2-Port Ka
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Spare parts kit
• Custom pack-ups

Technical Specifications Diagram

Inquire

AVL 1030FA Antenna Datasheet (98.76KB)



Summary
AvL 1030FA 1.0m Military Motorized Tri-Band FlyAway Antenna 2-port Ka-band AvL's 1030FA positioner FlyAway Military antenna systems offer superior performance in a truly compact, lightweight and portable package. The 1.0m antenna systems are commercial airline checkable (two cases, each weighs <70 lbs) and can be flown or shipped anywhere, then set up and operational within minutes. AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service AvL 1030FA 1.0m SNG/Military Systems feature: • Commercial airline checkable - packs into two cases, each weighs <70 lbs. • Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation • 1.0m segmented 6-piece AvL carbon fiber reflector with optional (1.2m) extender panels • Rugged AvL Cable Drive Case-Based Positioner • Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount • Offset Prime Focus Highly Efficient Optics • Available in Ku (precision or mode-match), X and Ka-band for commercial or military applications • Motorized AvL Cable Drive for reliable positioning • One button auto-acquisition controller • Interfaces with all types of RF electronics and satellite services • MIL-STD-188-164A Compliant • 15-Minute Setup While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation. AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram
Inquire