AvL 1030-T 1,0 m SNG Motorizado Tri-Banda FlyAway Trípode de la Antena de banda Ku

AvL 1030-T 1.0m SNG Antena trípode FlyAway de triple banda motorizada, banda Ku de precisión de 2 puertos (comp. estándar Cross-Pol)

IKtechcorp es el distribuidor de AVL Antanna Systems, un fabricante y proveedor líder de equipos satelitales comerciales. AVL Technologies ofrece una amplia gama de antenas utilizadas en las industrias VSAT, DTH, COTM, Teleport, Cable y Broadcast . Satélite, DTH, VSAT, Flyaway, despliegue rápido, solo recepción, RF, punto automático motorizado, antenas de vehículos
• Rx/Tx Feed: Banda Ku (LP) de precisión de 2 puertos
- Recibir: 10,95 - 12,75 GHz
- Transmitir: 13,75 - 14.

Código: avl_1030-t_ku

Llamar para preguntar el precio

AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)



Summary
AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.) AvL's 1030-T positioner FlyAway SNG antenna systems offer superior performance in a truly compact, lightweight and portable package. The 1.0m antenna systems are commercial airline checkable (two cases, each weighs <70 lbs) and can be flown or shipped anywhere, then set up and operational within minutes. AvL’s FlyAway SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service AvL 1030-T 1.0m SNG Systems feature: • Commercial airline checkable - packs into two cases, each weighs <70 lbs. • Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation • 1.0m segmented 6-piece AvL carbon fiber reflector with optional (1.2m) extender panels • Rugged AvL Cable Drive Case-Based Positioner • Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount • Offset Prime Focus Highly Efficient Optics • Available in Ku (precision or mode-match), X and Ka-band for commercial or military applications • Motorized AvL Cable Drive for reliable positioning • One button auto-acquisition controller • Interfaces with all types of RF electronics and satellite services • MIL-STD-188-164A Compliant • 15-Minute Setup

Technical Specifications Diagram
Inquire

AvL 1030-T 1.0m SNG Motorized Tri-Band FlyAway Tripod Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS

Az/El Drive	Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System	Motorized/Manual Options depending on feed
Reflector Construction	1.0m Segmented 6-Piece AvL Carbon Fiber Reflector (optional 1.2m segmented 10-piece reflector)

*Axis Travel* ▼
Azimuth	±90°
Elevation (reflector boresight)	0° - 100° (7° - 100° over tripod legs)
Polarization	±95°

*Az/El Speed:* ▼
Slewing/Deploying (typical)	Azimuth: 2°/sec Elevation: 1°/sec
Peaking (typical)	Azimuth: 0.2°/sec Elevation: 0.2°/sec

Motors	24 VDC Variable Speed, Constant Torque

*Standard Interfaces:* ▼
BUC (& other CFE) Mounting	Feed boom or behind reflector (additional CFE case or optional case required)
RF	Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical	30 ft. cable with connectors for controller


Electrical Interface	Connectors on base

*Transit Configuration (Ku-band):* ▼	Tripod-Based
Case 1: Positioner & Feed	31.3” x 20.4” x 15.5” (< 70 lbs)
Case 2: Reflector, Boom, Controls	31.3” x 20.4” x 15.5” (< 70 lbs)

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival	80 mph in zenith position
*Wind - Operational*: ▼
Without Anchoring	30 mph
With Anchoring	30 mph gusting to 45 mph

*Pointing Loss in Wind:* ▼
Ku-band	0.7 dB max (1.0m reflector)
Ka-band	2.0 dB max (1.0m reflector)
X-band	1.5 dB max (1.2m reflector with extender panels)

*Temperature:* ▼
Operational	-22° to 125° F (-30° to 52° C)
Survival	-40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	Std. 2-Port Ku

Frequency Range (GHz)	10.95 - 12.75	13.75 - 14.50
Polarization Configuration	Linear Orthogonal standard, Optional Co-pol
Gain (mid-band) @ Horn Interface (dBi)	40.0 dBi	41.5 dBi
-3dB Beamwidth (mid-band)	1.8°	1.5°
First Sidelobe Level (typical)	-22 dB	-22 dB
Antenna Noise Temperature (midband)	54° K at 11.85 GHz
Radiation Pattern Compliance	FCC § 25.209, ITU-R S.580.6
Maximum Feed Transmit (Tx) Power		500 watts per port
Maximum Allowable Power		-14dBw/4kHz (per FCC) -0dBw/4kHz (per ITU)
VSWR	1.30:1	1.30:1
G/T with 50˚ LNB, midband, clear horizon	19.6 dB/K

*Cross-Polarization Isolation (Ku only):* ▼
On Axis (minimum)	35 dB	35 dB
Off Axis ( in 1 dB BW)	28 dB	30 dB

Feed Port Isolation – Tx to Rx (dB)	35 dB	85 dB

CONTROLLER SPECIFICATIONS: STANDARD

*Controller Type* ►	*Std. Auto-Acquire with Opt. Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface	Menu-driven display w/ keypad
Input Power	115/230 VAC (at rack); up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

*Controller Type* ►	*Opt. Enhanced Auto-Acquire with Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• Upgrade from 2-Port Precision Ku Feed to:
a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku;
b) 2-Port X MIL;
c) 2-Port Ka
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Spare parts kit
• Custom pack-ups

Technical Specifications Diagram

Inquire

AVL 1030FA Antenna Datasheet (98.76KB)