AvL 1050FA 1,4 m Militar Motorizado Tri-Banda FlyAway Antena de Banda X

AvL 1050FA Antena FlyAway de triple banda motorizada militar de 1,4 m, banda X de 2 puertos

IKtechcorp es el distribuidor para AVL Antanna Systems, un fabricante y proveedor líder de equipos satelitales comerciales. AVL Technologies ofrece una amplia gama de antenas utilizadas en las industrias VSAT, DTH, COTM, Teleport, Cable y Broadcast. Satélite, DTH, VSAT, Flyaway, implementación rápida, sólo recibir, RF, punto automático motorizado, antenas de vehículos
• Rx/Tx Feed: 2 puertos X-Band Military
- Recibir:
- Transmitir: 7.

Código: avl_1050fa_x

Llamar para preguntar el precio

Descripción

Especificaciones

AvL 1050FA 1.4m Military Motorized Tri-Band FlyAway Antenna 2-port X-band

Summary

AvL 1050FA 1.4m Military Motorized Tri-Band FlyAway Antenna 2-port X-band
AvL's 1050FA case-based positioner FlyAway Military antenna systems offer enhanced-wind tolerance with a compact, rugged and portable package. The 1.4m antenna systems pack into two rugged cases to be shipped anywhere, then set up and operational within minutes.

AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service.
AvL 1050FA 1.4m SNG/Military Systems feature:
• Commercial airline checkable - packs into two rugged cases
• Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation
• 1.4m Segmented AvL Carbon Fiber Reflector
• Rugged AvL Cable Drive Case-Based Positioner
• Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount
• Offset Prime Focus Highly Efficient Optics
• Available in Ku- (precision or mode-match), X- and Ka-band for commercial or military applications; upgradable to L-Band
• Motorized AvL Cable Drive for reliable positioning
• One button auto-acquisition controller
• Interfaces with all types of RF electronics and satellite services
• MIL-STD-188-164A Compliant
• 15-Minute Setup
While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram

Inquire

AvL 1050FA 1.4m Military Motorized Tri-Band FlyAway Antenna 2-port X-band

MECHANICAL SPECIFICATIONS

Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)

Polarization Drive System Motorized Rotation of Feed

Reflector Construction 1.4m Segmented Carbon Fiber

Axis Travel ▼

Azimuth ±200°

Elevation (reflector boresight) 5° - 100° of reflector boresight from calibrated inclinometer (El range may vary depending upon CFE)

Polarization ±95°

Az/El Speed: ▼

Slewing/Deploying (typical) 2°/sec Elevation: 1°/sec

Peaking (typical) 0.2°/sec

Motors 24 VDC Variable Speed, Constant Torque

Standard Interfaces: ▼

BUC Mounting Feed boom or behind reflector (additional CFE case or optional case required)

RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port

Electrical 30 ft. cable with connectors for controller

Manual/Emergency Drive Handcranks for Az and El, Knob on Pol axis

Transit Configuration (Ku-band): ▼

Two rugged, weather-resistant plastic cases, total weight 260 lbs. (typical)

Positioner 27” x 20” x 22”, 110 lbs. max, 100 lbs. typical

Outriggers/Feed Boom/Reflector 43” x 28” x 21”, 150 lbs. max (Includes Ku or Ka Feed), 140 lbs. typical

Additional Feeds 43” x 28” x 21”, 70 lbs typical, dependent on feed options selected

Set-up Time Less than 15 minutes.

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival 80 mph in zenith position

Wind - Operational: ▼

Without Anchoring 30 mph

With Anchoring 30 mph gusting to 40 mph

Pointing Loss in Wind: ▼

Ku-band 0.1 dB typical, 0.5 dB max

Ka-band 0.3 dB typical, 1.0 dB max

X-band 0.1 dB typical, 0.2 dB max

Temperature: ▼

Operational -22° to 125° F (-30° to 52° C)

Survival -40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS Receive Transmit

Feed Type ► Opt. 2-Port X (Military/WGS) (1.4m Reflector)

Frequency Range (GHz) 7.25 - 7.75 GHz 7.9 - 8.4 GHz

Polarization Configuration RHCP or LHCP

Gain (mid-band) @ Horn Interface (dBi) 37.6 dBi (less opt. filter) 38.1 dBi (less opt. filter)

-3dB Beamwidth (mid-band) 2.3° 2.1°

Antenna Noise Temperature (midband) 52° K

Radiation Pattern Compliance MIL-STD-188-164A

Maximum Feed Transmit (Tx) Power 1000 watts per port

VSWR 1.30:1 1.30:1

G/T with 50˚ LNB, midband, clear horizon 17.3 dB/°K with 55ºK LNB

Axial Ratio (CP only, within pointing cone ) 1.21 dB 2.0 dB

Port-to-Port Isolation – Tx to Rx 115 (includes optional filter) 115 (includes optional filter)

CONTROLLER SPECIFICATIONS: STANDARD

Controller Type ► Std. Auto-Acquire with Opt. Ethernet IP Interface

Standard Feature ▼

Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)

User Interface Menu-driven display w/ keypad

Input Power 115/230 VAC (at rack); up to 200W

Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

Controller Type ► Opt. Enhanced Auto-Acquire with Ethernet IP Interface

Standard Feature ▼

Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)

User Interface Intelligent/simple GUI for on-board or remote CFE laptop

Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W

Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• Standard Configuration: Case-Based
• Optional Configuration: Tripod
• BUC/HPA mounting
• Stabilization leg options
• Waveguide interconnect options
• Beacon Receiver and Inclined Orbit Tracking Mode
• Ku-band Mode Matched Feed (Eutelsat)
• Ku-band Co-pol Kit
• DBS, Commercial Ka Feeds (future)

Technical Specifications Diagram

Inquire



Summary
AvL 1050FA 1.4m Military Motorized Tri-Band FlyAway Antenna 2-port X-band AvL's 1050FA case-based positioner FlyAway Military antenna systems offer enhanced-wind tolerance with a compact, rugged and portable package. The 1.4m antenna systems pack into two rugged cases to be shipped anywhere, then set up and operational within minutes. AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service. AvL 1050FA 1.4m SNG/Military Systems feature: • Commercial airline checkable - packs into two rugged cases • Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation • 1.4m Segmented AvL Carbon Fiber Reflector • Rugged AvL Cable Drive Case-Based Positioner • Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount • Offset Prime Focus Highly Efficient Optics • Available in Ku- (precision or mode-match), X- and Ka-band for commercial or military applications; upgradable to L-Band • Motorized AvL Cable Drive for reliable positioning • One button auto-acquisition controller • Interfaces with all types of RF electronics and satellite services • MIL-STD-188-164A Compliant • 15-Minute Setup While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation. AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram
Inquire