AvL 2020FA 2,0 m Militar Motorizado Quad-Band FlyAway Antena de Banda X

AvL 2020FA Antena FlyAway de banda cuádruple motorizada militar de 2,0 m Banda X de precisión de 2 puertos

IKtechcorp es el distribuidor de AVL Antanna Systems, un fabricante y proveedor líder de equipos satelitales comerciales. AVL Technologies ofrece una amplia gama de antenas utilizadas en las industrias VSAT, DTH, COTM, Teleport, Cable y Broadcast. Satélite, DTH, VSAT, Flyaway, implementación rápida , sólo recepción, RF, punto automático motorizado, antenas de vehículos
• Rx/Tx Feed: 2 puertos X-Band Military
- Recibir:
- Transmitir: <

Código: avl_2020fa_2m_x

Llamar para preguntar el precio

Descripción

Especificaciones

Documentación

AvL 2020FA 2.0m Military Motorized Quad-Band FlyAway Antenna 2-port Precision X-Band

Summary

AvL 2020FA 2.0m Military Motorized Quad-Band FlyAway Antenna 2-port Precision X-Band
AvL's Model 2.0m 2020FA FlyAway Military antenna system offers standard wind performance in a lightweight and portable package. All 2020FA FlyAway SNG antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes. These antenna systems are produced in high volume for a significant U.S. Army program.

AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service.
AvL 2020FA Ka-Band 2.0m Military Systems feature:
• Packs into three or four cases depending on options selected; positioner is integrated into one
• 2.0m Segmented 9-piece Carbon Fiber Reflector
• 2-man lift
• 2220 Rugged/Heavy Duty Case-Based Positioner
• Quad-band feed capability:
-Ku-Band (LP)
-Ka-Band (LP or CP)
-X-Band (CP)
-C-Band (LP or CP) available for some international locations
• Zero Backlash Az/El drive system with patented AvL Cable Drive Positioner
• Elevation over azimuth mount geometry
• Polarization adjustment by motorized rotation of linear feeds
• Case-based systems with the positioner integrated into one case for stability and ease of set-up
• Fully compliant for FCC and Intelsat; Eutelsat compliance optional
• One button auto-acquisition controller
• 15-Minute Setup
While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram

Inquire

AvL 2020FA 2.0m Military Motorized Quad-Band FlyAway Antenna 2-port Precision X-Band

MECHANICAL SPECIFICATIONS

Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)

Polarization Drive System Motorized Rotation of Feed

Reflector Construction 2.0m Segmented 9-piece Carbon Fiber

Axis Travel ▼

Azimuth ±200°

Elevation (operational) 0° - 90° with ±200° Az Travel

Polarization (LP feeds) ±95° Adjustable within <1°

Az/El Speed: ▼

Slewing/Deploying (typical) 2°/sec Elevation: 1°/sec El

Peaking (typical) 0.2°/sec

Motors 24 VDC Variable Speed, Constant Torque

Standard Interfaces: ▼

BUC Mounting Feed boom or behind reflector (additional CFE case or optional case required)

RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port

Electrical 30 ft. cable with connectors for controller

Manual/Emergency Drive Handcranks for Az and El, Knob on Pol axis

Transit Configuration: ▼

Three rugged, weather-resistant plastic cases, total weight: 450 lbs.

2020 Motorized Positioner 26" x 24" x 30", 170 lbs

Outriggers/Feed Boom/Ku or Ka Feed 71” x 18” x 19”, 110 lbs. (includes Ku or Ka feed)

Reflector Panels 38” x 38” x 22”, 170 lbs.

Additional Feeds 43” x 27” x 20”, 70 lbs. typical, dependent on feed options selected (optional)

Set-up Time Less than 15 minutes.

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival 80 mph in zenith position

Wind - Operational: ▼

Without Anchoring 30 mph

With Anchoring 30 mph gusting to 45 mph

Pointing Loss in Wind: ▼

Ku-band 0.1 dB typical, 0.5 dB max

Ka-band 1.0 dB typical, 2 dB max

Temperature: ▼

Operational -22° to 125° F (-30° to 52° C)

Survival -40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS Receive Transmit

Feed Type ► Opt. 2-Port X (Military/WGS)

Frequency Range (GHz) 7.25 - 7.75 7.9 - 8.4

Polarization Configuration Circular RHCP or LHCP

Gain (mid-band) @ Horn Interface (dBi) 42.0 dBi 42.8 dBi

VSWR 1.30:1

-3dB Beamwidth (mid-band) 1.2° 1.1°

Antenna Noise Temperature (midband) 50° K

Radiation Pattern Compliance MIL-STD-188-164A

Maximum Feed Transmit (Tx) Power 1000 watts per port

G/T with 50˚ LNB, midband, clear horizon 21.7 dB/° K (with 55°K LNB)

Axial Ratio (CP only, within pointing cone ) 1.21 dB 2.0 dB

Feed Port Isolation – TX to RX (dB) 115 (includes filter) 115 (includes filter)

CONTROLLER SPECIFICATIONS: STANDARD

Controller Type ► Std. Auto-Acquire with Opt. Ethernet IP Interface

Standard Feature ▼

Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)

User Interface Menu-driven display w/ keypad

Input Power 115/230 VAC (at rack); up to 200W

Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

Controller Type ► Opt. Enhanced Auto-Acquire with Ethernet IP Interface

Standard Feature ▼

Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)

User Interface Intelligent/simple GUI for on-board or remote CFE laptop

Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W

Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Controller options – see above
• Spare parts kit

Technical Specifications Diagram

Inquire

AVL 2020FA 2m Antenna Datasheet (98.83KB)



Summary
AvL 2020FA 2.0m Military Motorized Quad-Band FlyAway Antenna 2-port Precision X-Band AvL's Model 2.0m 2020FA FlyAway Military antenna system offers standard wind performance in a lightweight and portable package. All 2020FA FlyAway SNG antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes. These antenna systems are produced in high volume for a significant U.S. Army program. AvL’s FlyAway Military antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service. AvL 2020FA Ka-Band 2.0m Military Systems feature: • Packs into three or four cases depending on options selected; positioner is integrated into one • 2.0m Segmented 9-piece Carbon Fiber Reflector • 2-man lift • 2220 Rugged/Heavy Duty Case-Based Positioner • Quad-band feed capability: -Ku-Band (LP) -Ka-Band (LP or CP) -X-Band (CP) -C-Band (LP or CP) available for some international locations • Zero Backlash Az/El drive system with patented AvL Cable Drive Positioner • Elevation over azimuth mount geometry • Polarization adjustment by motorized rotation of linear feeds • Case-based systems with the positioner integrated into one case for stability and ease of set-up • Fully compliant for FCC and Intelsat; Eutelsat compliance optional • One button auto-acquisition controller • 15-Minute Setup While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation. AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram
Inquire