E0001106-0001 iDIRECT LNB cambio Manual del Modelo de E0001106-0001
Los LNB PLL universales de iDirect cubren las tres subbandas de enlace descendente de banda Ku (10,70-12,75 GHz) al cambiar entre dos rangos de banda L a través del control de tono automático de 22 kHz por control remoto o mediante un interruptor mecánico seleccionado por el usuario. Muy estable, con poco ruido y una excelente opción para las redes Evolution o Velocity.
| Electrical Specifications | Input Frequency | Range Low Band: 10.70 to 11.70 GHz; High Band: 11.70 to 12.75 GHz |
| Output Frequency | Range Low Band: 950 to 1,950 MHz; High Band: 1,100 to 2,150 MHz | |
| Local Frequency | Low Band: 9.75 GHz; High Band: 10.60 GHz | |
| Conversion Gain | ||
| Noise Figure @ 25°C | 0.8 dB typ., 1.0 dB max. | |
| Local Stability | +/- 35 ppm max. (initial setting error and across temperature range) | |
| Recommended for Evolution carriers down to a minimum of 1 Msps. | ||
| Image Rejection | 40 dB min. | |
| Input V.S.W.R. | 2.5 : 1 typ. | |
| Output V.S.W.R. | 2.3 : 1 max. | |
| DC Power Requirement | ||
| [Input Port] | IF Output Connector; DC Supply combined with IF Signal | |
| [Voltage Range] | +12 to +24 VDC | |
| [Current Drain] | 145 mA typ., 170 mA max | |
| Frequency Band Selection | [Select Type] | Outside Rotary Switch |
| L Setting: Low Band (initial setting) | ||
| Mechanical Specifications | Input Interface | Waveguide, WR-75 (with Groove) |
| Output Interface | F-Type, Female | |
| Dimension & Housing (without Interface Connector) | 82.2 (L) x 40 (W) x 40 (H) mm | |
| 3.24” (L) x 1.57” (W) x 1.57” (H) | ||
| Weight | 210 g (0.46 lbs | |
| Environmental Specifications | Temperature Range (ambient) | -40 to +60°C (operating) |
| -40 to +80°C (storage) | ||
| Humidity | 0 to 100% | |
| Altitude | 15,000 feet max. | |
| Compliance | CE, FCC, RoHS | |