Foxcom Platine Bande L PL7220T [PL7220T1550]/PL7220R10 liaison Descendante de la Faible Puissance d'Entrée, 10 dB Budget Optique

Foxcom Platinum L-Band PL7220T [PL7220T1550]/PL7220R10 DownLink faible puissance d'entrée, budget optique 10 dB

IKtechcorp est le distributeur de Foxcom Communications Fiber Optic Systems, l'un des principaux fabricants et fournisseurs d'équipements satellitaires commerciaux. Foxcom propose une large gamme de liaisons en fibre utilisées dans les secteurs VSAT, DTH, COTM, Teleport, Cable et Broadcast. Satellite, DTH, VSAT, optique, fibre optique, RF.

• Bande L : 950 – 3000 MHz
• Plus de 25 Km. distance [40 Km avec PL7230T1550]
• De puissantes capacités de gestion via un écran LCD en façade et un SNMP monté en rack
• Contrôle par l'utilisateur et réglage du niveau IMD requis
• Contrôle de la puissance LNB via LCD ou SNMP : +13 ou 18 VDC

Code produit: Foxcom_PL7220R10

Appelez pour les Prix

Foxcom Platinum L-Band PL7220T [PL7220T1550]/PL7220R10 DownLink Low Input Power, 10 dB Optical Budget



Summary
Foxcom L-Band PL7220T [PL7220T1550]/PL7220R10 DownLink Low Input Power, 10 dB Optical Budget Foxcom’s Platinum L-band products are designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With low RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 10 dB optical budget with thePL7220R10 receiver. Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability. In addition IMizer, an automated adjustable link calibration embedded system enables the user to align the RF links IMD/CNR to specific linearity performances without a two-tone test. Select the desired IMD for the optical transmitter, either locally or remotely, IMizer automatically adjusts the laser drive to meet the IMD requirements. TheIMizer requires the use of a correction factor table above 2.5 GHz. Each low profile individual transmitter or receiver can be “hot swapped” in the subrack chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications. The PL7220T [1550] transmitter and the PL7220R10 receiver are designed for chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required even under full subrack loading and full LNB powering.

Order Diagram - Options

Foxcom Platinum L-Band PL7220T [PL7220T1550] / PL7220R10 DownLink Low Input Power, 10 dB Optical Budget

RF Specifications	Units	Typical	Minimum	Maximum

Frequency Range - Bandwidth	MHz	950 - 3000		-
Amplitude Response @ unity gain 950-3000 [MHz] any 36 MHz	dB	±1 ±0.2		±2.25 0.25
Gain Stability	dB/24hr	± 0.2		± 0.25
Gain Slope1	dB	0	-1.5	+1.5
Gain Variation over temperature	dB	± 1.5	-2	2
SFDR2	dB/Hz2/3	88
SFDR3	dB/Hz2/3	88
DR (Dynamic Range - single channel)4	dB			30
CNR[any 36 MHz]2	dB	53	50	57
Noise Figure (NF)2	dB	38		41
Noise Figure (NF)3	dB	10		13
Output IP3 (OIP3)5	dBm	0	-5
Group Delay Variation - linear 950-1200 MHz 1200-3000 MHz	ns	3 1.5
Input/Output Impedance	Ohm	50 or 75
1 dB Compression Point 2	dBm	-16		-15
Phase Noise 6	dB	None
Third Order InterModulation [IMD]4	dBc	-40	-55	-40
RF Input Signal Range - Total Power	dBm		-50	-25
Maximum input without damage	dBm			+15
Output Signal Range - Total Power7 8 9	dBm		-30 -45	-25 -25
TX/RX Input/Output Return Loss 50 Ohm 75 Ohm10	dB	-15 -13	-15
Test Port [front panel sample port]11	dB	-20	-22	-18
RF Connector Input/Output Test port	Type	F, SMA, N F, BNC


Optical Specifications		Typical	Minimum	Maximum

Optical Wavelength	nm	1310/1550/CWDM
Optical Power Output	mW/dBm	2 / 3	1.7/2.5
Optical Budget / Distance 10 dB optical budget	Km	1310 nm \| 1550 nm 25 \|40
RX Optical Input Power	dBm	-7	-8	+1
Optical Connector Types		FC/APC or SC/APC (E2000 option)	-
Optical Return Loss	dB		-60	-55


Electrical Specifications

Supply Voltage	VDC	12
Supply Current 12 TX, no LNB	Amps	0.45 0.75		0.9
Supply Current [TX with LNB]6	Amps	0.9 max.
Supply Current (RX)	Amps	0.45
EMI Rating		EMI Rating: FCC Class A, CE Mark


Physical Specifications

Operating Temperature Range	ºC		-10	+55
Storage Temperature Range	ºC		-45	+85
Relative Humidity		95% non-condensing
Altitude	ft / km	10,000 [3.08 ] operating13 14,000 [12.2] non-operating
Dimensions [D×W×H]	ins/cm	12×0.8×4 / 30.5×2×10.2
Weight	lbs./Kg	0.5 / 0.23
MTBF	Hours	TX: 309,481 RX: 359,057
MTTR	Hours	0.083
Shock & Vibration		Designed for normal transportation environment per section MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration

1. Within flatness spec 2. -25 dBm RF input, link gain = 0 dB, IMD=-40 dBc @ 0 dBm optical input - max. RF input 3. -55 dBm RF input, link gain =0 dB, IMD=-40 dBc @ 0 dBm optical input - min. RF input 4. User adjustable 5. -25 dBm RF in @ IMD=-40 dBc 6. Direct modulation utilized 7. Alarm trip point: RED -2 dBm, AMBER -58 dBm 8. @ 0 dB optical loss 9. @ 10 dB optical loss 10. -15 dB @ 950 to 3000 MHz, -11 dB @ 2500 to 3000 MHz 11. -45 dBm minimum input 12. Under 10º add 120 mA [laser heating] 13.. WIth standard adiabatic derating at 2ºC/1000ft. [0.3 Km.]

Foxcom L-Band PL7220T [PL7220T1550] / PL7220R10 DownLink Datasheet (106.02KB)