Foxcom Platine SI la Bande PL7330T [PL7330T1550]/PL7330R10 Lien de la Puissance Élevée d'Entrée, 10dB Budget Optique

Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link Entrée haute puissance, budget optique 10dB

IKtechcorp est le distributeur de Foxcom Communications Fiber Optic Systems, l'un des principaux fabricants et fournisseurs d'équipements satellitaires commerciaux. Foxcom propose une large gamme de liaisons en fibre utilisées dans les secteurs VSAT, DTH, COTM, Teleport, Cable et Broadcast. Satellite, DTH, VSAT, optique, fibre optique, RF.

• Bande FI : 10–200 MHz
• Plus de 25 km de distance [40 km avec un PL7330T1550]
• De puissantes capacités de gestion via un écran LCD en façade et un SNMP monté en rack
• Contrôle par l'utilisateur et réglage du niveau IMD requis
• Variété de connecteurs RF et optiques

Code produit: Foxcom_PL7330R10

Appelez pour les Prix

Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget



Summary
Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget Foxcom’s Platinum IF products are designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 4 dB optical budget with thePL7330R4 and 10 dB optical budget with the PL7330R10 receiver. Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability. In addition IMizer, an automated adjustable link calibration embedded system enables the user to align the RF links IMD/CNR to specific linearity performances without a two-tone test. Select the desired IMD for the optical transmitter, either locally or remotely, IMizer automatically adjusts the laser drive to meet the IMD requirements. Each low profile individual transmitter or receiver can be “hot swapped” in the subrack chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications. The PL7330T transmitters and PL7330R4/R10 receivers are designed for subrack chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required even under full subrack loading and full LNB powering.

Order Diagram - Options

Foxcom Platinum IF Band PL7330T [PL7330T1550] / PL7330R10 Link High Power Input, 10dB Optical Budget

RF Specifications	Units	Typical	Minumum	Maximum

Frequency Range - Bandwidth	MHz	10 - 200		-
Amplitude Response @any Unity Gain 10 – 200 MHz any 36 MHz	dB	±0.25 ±0.2	.	±0.25 ±0.2
Gain Stability	dB/24hr	± 0.2		± 0.25
Gain Variation over temperature	dB		-2	2
SFDR1	dB/Hz	103
SFDR2	dB/Hz	99
DR (Dynamic Range - single channel)3	dB			30
CNR [any 1 MHz] 2	dB	70	67	73
Noise Figure (NF)1	dB	27		30
Noise Figure (NF)2	dB	13		15
Output IP3 (OIP3)4	dBm	-	+15	+20
Group Delay Variation- linear @ 10 to 30 MHz 30 to 200 MHz	ns	<3.0 <1.0
Input/Output Impedance	Ohm	50 or 75
1 dB Compression Point	dBm	2		3
Phase Noise5	None
Third Order InterModulation [IMD]6	dBc		-55	-40
Input Signal Range - Total Power	dBm		-30	-5
Maximum Input without Damage				+15
Output Signal Range - Total Power7	dBm		-30	-5
TX/RX Input/Output Return Loss 50 Ohm 75 Ohm	dB	-18 -17		-18 -17
Test Port [front panel sample port]8	dB	-20	-22	-18
RF Connector Input/Output Test Port	Type	F, SMA, BNC, N F, BNC


Optical Specifications	Units	Typical	Minimum	Maximum

Optical Wavelength	nm	1310/1550/CWDM
Optical Power Output	mW/dBm	2 / 3	1.7/2.5
Optical Budget / Distance 10 dB optical budget	dBm/km	1310 nm \| 1550 nm 25 \| 40
RX Optical Input Power	dBm	-7	-8	+1
Optical Connector Types	Type	FC/APC or SC/APC (E2000 option)
Optical Return Loss	dB		-60	-55


Electrical Specifications

Supply Voltage	Vdc	12
Supply Current [TX]9	Amps	0.35
Supply Current (RX)	Amps	0.45
EMI Rating		EMI Rating: FCC Class B CE Mark


Physical Specifications

Operating Temperature Range	ºC		-10	+55
Storage Temperature Range	ºC	-45 to +85	-45	+85
Relative Humidity		95% non-condensing
Altitude	ft / Km	10,000 [3.08 ] operating10 14,000 [12.2] non-operating
Dimensions [D×W×H]	ins/cm	12×0.8×4 / 30.5×2×10.2
Weight	lbs./Kg	0.5 / 0.23
MTBF	Hours	TX: 309,481 RX: 359,057
MTTR	Hours	0.083
Shock & Vibration		Designed for normal transportation environment per section MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration.

1. -5 dBm RF input, link gain = 0 dB, IMD=-40 dBc @ 0 dBm optical input - max. RF input 2. -30 dBm RF input, link gain = 25 dB, IMD=-40 dBc @ 0 dBm optical input - min.. RF input 3. User adjustable 4. -5 dBm RF in @ IMD=-40 dBc 5. Direct modulation utilized 6. Adjustable. Above -10 dBm input min. -50 dBc 7. Alarm trip point: RED -2 dBm, AMBER -33 dBm 8. -45 dBm minimum input 9. Under 10º add 120 mA for TX [laser heating] 10. WIth standard adiabatic derating at 2ºC/1000ft. [0.3 Km.]

FFoxcom Platinum IF Band PL7330R10 Link Datasheet (102.02KB)