AvL 1215 1,2 m, Manuel ou Motorisé, envolez-vous SNG Compact, Portable, Antenne en Bande Ku

AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.)

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-Port Precision Ku-Band (LP)
- Receive: 10.95 - 12.75 GHz
- Transmit: 13.75 - 14.50 GHz
• Opt. Rx/Tx Feed: 2-Port Mode-Matched Ku-Band (CP)
• Ultra Lightweight Portable Antenna
• Key Features
- 2 Ballistic Nylon Cases, <50lb ea.
- Optional Motorization
- Assembles in <5 Minutes
- Interchangable Feed for Tri-Band Capability

Code produit: avl_1215_ku

Appelez pour les Prix

AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.)



Summary
AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.) AvL’s 1.2m Manual FlyAway Antenna System weighs 62 lbs assembled with a Ku-band feed, and is compact enough to fit into two ballistic nylon cases. The robust carbon fiber reflector and tripod base are rugged enough for operations in harsh conditions. The antenna’s tripod base can be anchored to increase wind resistance, and the antenna assembles in 5 minutes. AvL’s Manual FlyAway Antennas are lightweight, compact, portable, and robust with carbon fiber reflectors and easy-to-assemble tripods. AvL’s Az/El positioners feature easy pointing as well as fine-tuning, and are easy and quick to assemble. As with all AvL antenna systems, the Manual FlyAway Antennas interface with any modem, RF electronics, or satellite service, and achieve pointing accuracy and pointing stability even in the most extreme conditions. AvL 1215 Ku-Band Manual or Motorized FlyAway SNG/Military Antenna feature: • 1.2m, 4 piece Carbon Fiber Reflector • Lightweight, compact and portable in two small cases • Fast interchangeable feed system with tri-band capability: Ku, Ka and X; DBS capable • Assembles in less than 5 minutes • Feed rotation for polarization • Easy pointing and fine-tuning Az/El positioner • Manual actuators enable full range of motion • Tripod legs can be anchored to increase wind resistance • Single- or multi-band options for worldwide operation • Prime focus offset optics with global mode-matched feed • Manual actuators enable full range of motion • Quick set-up operational in minutes • Interface with all types of RF electronics and services • Numerous packaging options including backpacks and rugged cases

Technical Specifications Diagram
Inquire

AvL 1215 1.2m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ku-Band (standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS

Reflector Construction	1.2m segmented 4 piece Carbon Fiber
*Axis Travel*: ▼
Azimuth	Coarse: 360 degree continuous / Fine: ±10°
Elevation	Coarse: 5-90° / Fine: 5-90°
Polarization	±95°

*RF Interface:* ▼
BUC Mounting	Feed Boom (10 lbs max), or Remote
Coax	Two connectors at Amplifiers

Electrical Interface	Connectors at Amplifiers

*Stowed Configuration & Weights:* ▼
Reflector	36” x 25” x 5”, weighs 18 lbs
El Positioner	25” x 16” x 9”, weighs 13.7 lbs.
Az Positioner/Base	8.5” x 8.5” x 8”, weighs 14.3 lbs
Legs (3x)	9” x 5” x 20” (each), weights 2.7 lbs
Ku Feed/Feed Boom/Struts	34” x 4” x 8”, weighs 8lbs
Case Integration	Antenna fits into 2 ballistic nylon case, less than 50lb per case

Total Weight	62 lbs. (with KU Precision Feed)

Note: BUC and LNB are CFE

ENVIRONMENTAL SPECIFICATIONS

Wind - Survival	80 mph instowed position
Wind - Operational: ▼
Without anchoring	20 mph
With anchoring	30 mph (48 kph), Gusts to 45 mph (72 kph)

*Pointing Loss in Wind (Ku RX)*: ▼
Non-motorized	0.9 dB typical / 1.3 dB max

*Temperature:* ▼
Operational	-40°F to 140°F (-40°C to 60°C)
Survival	-50°F to 180°F (-46°C to 82°C)

ENVIRONMENTAL SPECIFICATIONS

Wind - Survival	Deployed: 60 mph (97 kph) (ballasted); Stowed: 90 mph (145 kph)
Wind - Operational	30 mph (48 kph), Gusts to 45 mph (72 kph)
*Pointing Loss in Wind (Ka RX)*:
With optional controls and/or motors	1.4 dB typical / 2.0 dB max

*Temperature:*
Operational	-22°F to 125°F (-30°C to 52°C)
Survival	-40°F to 140°F (-40°C to 60°C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	*Std. 2-Port Precision Ku-Band*
Frequency Range (GHz)	10.95 - 12.75	13.75 - 14.50
Polarization Configuration	Linear Orthogonal Standard, Optional Co-Pol

Gain (mid-band)	40.0 dBi	41.5 dBi
-3dB Beamwidth (mid-band)	1.8˚	1.5˚
Radiation Pattern Compliance	FCC §25.209, ITU-R S.580.6
Maximum Feed Transmit (Tx) Power		500
Antenna Noise Temperature (midband)	54˚ K
G/T, midband, clear horizon	19.6 dB/˚ K (50˚ LNB)

*Cross-Polarization Isolation (dB)* ▼
On-Axis	35	35
Off-Axis (within pointing cone) std. Precision feed	26	27
Off-Axis (within pointing cone) opt. MM feed	25	35

VSWR	1.30:1	1.30:1
Feed Port Isolation - Tx to Rx (dB)	35 dB	80 dB (incl. filter)

CONTROLLER SPECIFICATIONS

*Controller Type* ►	Optional AvL AAQ – Motorized or Computer-Assisted Pointing (CAP)
	Enhanced Auto-Acquire with Std. Ethernet IP Interface
Integration	Embedded w/ Ethernet IP interface (P/S optional) (optional rack- or shelf-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; 250W
Software Upgrades/Options (Motorized)	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

• Upgrade from 2-Port Precision Ku Feed to: a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku; b) 2-Port X MIL; c) 2-Port Ka MIL; d) 2-Port Ka Comm.
• Add co-polarization Kit (for 2-port Ku feeds only) - configures Rx and Tx to same polarization sense ) (may require second case) 
• Add BUC/HPA mounting (NOTE: minimum elevation may be restricted by these options) ) (may require second case)
• Upgrade to custom RF/IF I/O cabling configurations available
• Custom colorization (contact factory for available colors)
• Add custom logo on reflector face (1- or 2-Color; per AvL Logo Policy)
• Upgrade from standard manual pointing to AvL AAQ Enhanced Auto-Acquire (see Controller section, above, for some of these options) (may require second case)
• Add power supply for AAQ Controller upgrade (requires second case)
• Spare parts kit * Outside main beam
** Contact Sales for commercial Ka-band frequency range options and circular or linear polarization options.
*** Excluding optional filters

Technical Specifications Diagram

Inquire

Compliance Standard

Inquire

AVL 1215 Antenna Datasheet (258.61KB)