AvL 1215 1,2 m, Manuel ou Motorisé, envolez-vous Militaire Compact, Portable, Antenne en Bande Ka

AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-port Ka-Band Military
- Receive: 20.2 - 21.2 GHz
- Transmit: 30.0 - 31.0 GHz
• Ultra Lightweight Portable Antenna
• Key Features
- 2 Ballistic Nylon Cases, <50lb ea.
- Optional Motorization
- Assembles in <5 Minutes
- Interchangable Feed for Tri-Band Capability

Code produit: avl_1215_ka_mil

Appelez pour les Prix

AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band



Summary
AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band AvL’s 1.2m Manual FlyAway Antenna System weighs 62 lbs assembled with a Ku-band feed, and is compact enough to fit into two ballistic nylon cases. The robust carbon fiber reflector and tripod base are rugged enough for operations in harsh conditions. The antenna’s tripod base can be anchored to increase wind resistance, and the antenna assembles in 5 minutes. AvL’s Manual FlyAway Antennas are lightweight, compact, portable, and robust with carbon fiber reflectors and easy-to-assemble tripods. AvL’s Az/El positioners feature easy pointing as well as fine-tuning, and are easy and quick to assemble. As with all AvL antenna systems, the Manual FlyAway Antennas interface with any modem, RF electronics, or satellite service, and achieve pointing accuracy and pointing stability even in the most extreme conditions. AvL 1215 Ka-Band Manual or Motorized FlyAway Military Antenna feature: • 1.2m, 4 piece Carbon Fiber Reflector • Lightweight, compact and portable in two small cases • Fast interchangeable feed system with tri-band capability: Ku, Ka and X; DBS capable • Assembles in less than 5 minutes • Feed rotation for polarization • Easy pointing and fine-tuning Az/El positioner • Manual actuators enable full range of motion • Tripod legs can be anchored to increase wind resistance • Single- or multi-band options for worldwide operation • Prime focus offset optics with global mode-matched feed • Manual actuators enable full range of motion • Quick set-up operational in minutes • Interface with all types of RF electronics and services • Numerous packaging options including backpacks and rugged cases While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation. AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram
Inquire

AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band

MECHANICAL SPECIFICATIONS

Reflector Construction	1.2m segmented 4 piece Carbon Fiber
*Axis Travel*: ▼
Azimuth	Coarse: 360 degree continuous / Fine: ±10°
Elevation	Coarse: 5-90° / Fine: 5-90°
Polarization	±95°

*RF Interface:* ▼
BUC Mounting	Feed Boom (10 lbs max), or Remote
Coax	Two connectors at Amplifiers

Electrical Interface	Connectors at Amplifiers

*Stowed Configuration & Weights:* ▼
Reflector	36” x 25” x 5”, weighs 18 lbs
El Positioner	25” x 16” x 9”, weighs 13.7 lbs.
Az Positioner/Base	8.5” x 8.5” x 8”, weighs 14.3 lbs
Legs (3x)	9” x 5” x 20” (each), weights 2.7 lbs
Ku Feed/Feed Boom/Struts	34” x 4” x 8”, weighs 8lbs
Case Integration	Antenna fits into 2 ballistic nylon case, less than 50lb per case

Total Weight	62 lbs. (with KU Precision Feed)

Note: BUC and LNB are CFE

ENVIRONMENTAL SPECIFICATIONS

Wind - Survival	Deployed: 60 mph (97 kph) (ballasted); Stowed: 90 mph (145 kph)
Wind - Operational	30 mph (48 kph), Gusts to 45 mph (72 kph)
*Pointing Loss in Wind (Ka RX)*:
With optional controls and/or motors	1.4 dB typical / 2.0 dB max

*Temperature:*
Operational	-22°F to 125°F (-30°C to 52°C)
Survival	-40°F to 140°F (-40°C to 60°C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	Opt. 2-Port Ka-Band Military
Frequency Range (GHz)	20.2 - 21.2	30.0 - 31.0
Polarization Configuration	Circular (opt. linear feed available)

Gain (mid-band)	44.6 dBi	47.9 dBi
-3dB Beamwidth (mid-band)	1.2˚	0.8˚
Radiation Pattern Compliance	FCC 25.209, MIL-STD-188-164A
Maximum Feed Transmit (Tx) Power		250 watts
Antenna Noise Temperature (midband)	107˚ K
G/T, midband, clear horizon	21.1 dB/˚ K (100˚ LNB)
Axial Ratio (Ka and X only, within pointing cone)	1.5 dB	1.0 dB

VSWR	1.30:1	1.30:1
Feed Port Isolation - Tx to Rx (dB)	35 dB	80 dB (incl. filter)

CONTROLLER SPECIFICATIONS

*Controller Type* ►	Optional AvL AAQ – Motorized or Computer-Assisted Pointing (CAP)
	Enhanced Auto-Acquire with Std. Ethernet IP Interface
Integration	Embedded w/ Ethernet IP interface (P/S optional) (optional rack- or shelf-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; 250W
Software Upgrades/Options (Motorized)	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

• Upgrade from 2-Port Precision Ku Feed to: a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku; b) 2-Port X MIL; c) 2-Port Ka MIL; d) 2-Port Ka Comm.
• Add co-polarization Kit (for 2-port Ku feeds only) - configures Rx and Tx to same polarization sense ) (may require second case) 
• Add BUC/HPA mounting (NOTE: minimum elevation may be restricted by these options) ) (may require second case)
• Upgrade to custom RF/IF I/O cabling configurations available
• Custom colorization (contact factory for available colors)
• Add custom logo on reflector face (1- or 2-Color; per AvL Logo Policy)
• Upgrade from standard manual pointing to AvL AAQ Enhanced Auto-Acquire (see Controller section, above, for some of these options) (may require second case)
• Add power supply for AAQ Controller upgrade (requires second case)
• Spare parts kit * Outside main beam
** Contact Sales for commercial Ka-band frequency range options and circular or linear polarization options.
*** Excluding optional filters

Technical Specifications Diagram

Inquire

Compliance Standard

Inquire

AVL 1215 Antenna Datasheet (258.61KB)