AvL 1050FA 1,2 m SNG Motorisé Tri-Bande envolez-vous de l'Antenne en Bande Ku

AvL 1050FA 1.2m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-Port Precision Ku-Band (LP)
- Receive: 10.95 - 12.75 GHz
- Transmit: 13.75 - 14.50 GHz
• Airline Checkable Pack-up
• Case-Based (std.)
• Key Features
- 15 minute set-up
- Zero Backlash AvL Cable Drive
- Auto-Acquisition Controller

Code produit: avl_1050fa_ku

Appelez pour les Prix

La description
spécification

AvL 1050FA 1.2m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)



Summary
AvL 1050FA 1.2m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.) AvL's 1050FA case-based positioner FlyAway SNG antenna systems offer enhanced-wind tolerance with a compact, rugged and portable package. The 1.2m antenna systems pack into two rugged cases to be shipped anywhere, then set up and operational within minutes. AvL’s FlyAway SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service. AvL 1050FA 1.2m SNG Systems feature: • Commercial airline checkable - packs into two rugged cases • Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation • 1.2m Segmented 4-Piece AvL Carbon Fiber Reflector • Rugged AvL Cable Drive Case-Based Positioner • Case-Based Positioner (AvL or CFE) or Rugged Tripod Mount • Offset Prime Focus Highly Efficient Optics • Available in Ku- (precision or mode-match), X- and Ka-band for commercial or military applications; upgradable to L-Band • Motorized AvL Cable Drive for reliable positioning • One button auto-acquisition controller • Interfaces with all types of RF electronics and satellite services • MIL-STD-188-164A Compliant • 15-Minute Setup

Technical Specifications Diagram
Inquire

AvL 1050FA 1.2m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS

Az/El Drive	Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System	Motorized Rotation of Feed
Reflector Construction	1.2m Segmented 4-piece Carbon Fiber

*Axis Travel* ▼
Azimuth	±200°
Elevation (reflector boresight)	5° - 100° of reflector boresight from calibrated inclinometer (El range may vary depending upon CFE)
Polarization	±95°

*Az/El Speed:* ▼
Slewing/Deploying (typical)	2°/sec Elevation: 1°/sec
Peaking (typical)	0.2°/sec

Motors	24 VDC Variable Speed, Constant Torque

*Standard Interfaces:* ▼
BUC Mounting	Feed boom or behind reflector (additional CFE case or optional case required)
RF	Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical	30 ft. cable with connectors for controller

Manual/Emergency Drive	Handcranks for Az and El, Knob on Pol axis

*Transit Configuration (Ku-band):* ▼
Two rugged, weather-resistant plastic cases, total weight 260 lbs. (typical)
Positioner	27” x 20” x 22”, 110 lbs. max, 100 lbs. typical
Outriggers/Feed Boom/Reflector	43” x 28” x 21”, 150 lbs. max (Includes Ku or Ka Feed), 140 lbs. typical
Additional Feeds	43” x 28” x 21”, 70 lbs typical, dependent on feed options selected

Set-up Time	Less than 15 minutes.

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival	80 mph in zenith position
*Wind - Operational*: ▼
Without Anchoring	30 mph
With Anchoring	30 mph gusting to 40 mph

*Pointing Loss in Wind:* ▼
Ku-band	0.1 dB typical, 0.5 dB max
Ka-band	0.3 dB typical, 1.0 dB max
X-band	0.1 dB typical, 0.2 dB max

*Temperature:* ▼
Operational	-22° to 125° F (-30° to 52° C)
Survival	-40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	Std. 2-Port Ku (1.2m Reflector)

Frequency Range (GHz)	10.95 - 12.75 GHz	13.75 - 14.50 GHz
Polarization Configuration	Linear orthogonal standard
Gain (mid-band) @ Horn Interface (dBi)	41.6 dBi	43.1 dBi
-3dB Beamwidth (mid-band)	1.5°	1.2°
Antenna Noise Temperature (midband)	54° K
Radiation Pattern Compliance	FCC 25.209, ITU-R S.580-6, IESS 208
Maximum Feed Transmit (Tx) Power		500 watts per port
Maximum Allowable Power		-14dBw/4kHz (per FCC) -0dBw/4kHz (per ITU)
VSWR	1.30:1	1.30:1
G/T with 50˚ LNB, midband, clear horizon	21.3 dB/° K (with 50°K LNB)

*Cross-Polarization Isolation:* ▼
On Axis (minimum)	35 dB	35 dB
Within pointing cone	Std: 28 dB MM: 25 dB	Std: 30 dB MM: 35 dB

Feed Port Isolation – Tx to Rx (dB)	35 dB	80 dB (with filter)

CONTROLLER SPECIFICATIONS: STANDARD

*Controller Type* ►	*Std. Auto-Acquire with Opt. Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface	Menu-driven display w/ keypad
Input Power	115/230 VAC (at rack); up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

*Controller Type* ►	*Opt. Enhanced Auto-Acquire with Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• Standard Configuration: Case-Based
• Optional Configuration: Tripod
• BUC/HPA mounting
• Stabilization leg options
• Waveguide interconnect options
• Beacon Receiver and Inclined Orbit Tracking Mode
• Ku-band Mode Matched Feed (Eutelsat)
• Ku-band Co-pol Kit
• DBS, Commercial Ka Feeds (future)

Technical Specifications Diagram

Inquire