Bienvenue chez IK Tech Corporation
Votre guichet unique pour tous vos besoins en satellite

AvL 2020FA 2,0 m SNG Motorisé de la Quadruple-Bande envolez-vous de l'Antenne en Bande Ku

AvL 2020FA 2,0 m SNG Motorisé de la Quadruple-Bande envolez-vous de l'Antenne en Bande Ku

AvL 2020FA 1.6m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

IKtechcorp is the distributor for AVL Antanna Systems, a leading manufacturer and supplier of commercial satellite equipment. AVL Technologies offers a wide range antennas used in the VSAT, DTH, COTM, Teleport, Cable, and Broadcast industries. Satellite, DTH, VSAT, Flyaway, quick deploy, receive only, RF, motorized auto point, vehicle antennas.
• Rx/Tx Feed: 2-Port Precision Ku-Band (LP) 
- Receive: 10.95 - 12.75 GHz
- Transmit:
13.75 - 14.50 GHz
- Standard Cross-Pol comp.
• Opt. Rx/Tx Feed:
2-Port Mode-Matched Ku-Band (CP)
• Three rugged cases
• 2020 Case-Based Positioner
• Key Features
- Two-Man Lift & Carry
- Quad-band feed capability
- Enhanced wind tolerance
- Auto-Acquisition Controller
- 15-Minute Setup

Code produit: avl_2020fa_2m_ku

AvL 2020FA 2.0m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

AvL 2020FA 2.0m SNG/Military Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band Product Picture, Price, Image, Pricing
 
Summary

AvL 2020FA 2.0m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

AvL's Model 2.0m 2020FA FlyAway SNG antenna system offers standard wind performance in a lightweight and portable package. All 2020FA FlyAway SNG antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes.  These antenna systems are produced in high volume for a significant U.S. Army program.

AvL’s FlyAway SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service.

AvL 2020FA Ku-Band 2.0m SNG Systems feature:
• Packs into three or four cases depending on options selected; positioner is integrated into one 
• 2.0m Segmented 9-piece Carbon Fiber Reflector
• 2-man lift
• 2220 Rugged/Heavy Duty Case-Based Positioner
• Quad-band feed capability:
-Ku-Band (LP)
-Ka-Band (LP or CP)
-X-Band (CP)
-C-Band (LP or CP) available for some international locations
• Zero Backlash Az/El drive system with patented AvL Cable Drive Positioner
• Elevation over azimuth mount geometry
• Polarization adjustment by motorized rotation of linear feeds
• Case-based systems with the positioner integrated into one case for stability and ease of set-up
• Fully compliant for FCC and Intelsat; Eutelsat compliance optional
• One button auto-acquisition controller
• 15-Minute Setup

While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

 

     
Technical Specifications Diagram    
Inquire

AvL 2020FA 2.0m SNG Motorized Quad-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS
   
Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System Motorized Rotation of Feed
Reflector Construction 2.0m Segmented 9-piece Carbon Fiber
   
Axis Travel
Azimuth ±200°
Elevation (operational) 0° - 90° with ±200° Az Travel
Polarization (LP feeds) ±95° Adjustable within <1°
   
Az/El Speed:
Slewing/Deploying (typical) 2°/sec Elevation: 1°/sec El
Peaking (typical) 0.2°/sec
   
Motors 24 VDC Variable Speed, Constant Torque
   
Standard Interfaces:
BUC Mounting Feed boom or behind reflector (additional CFE case or optional case required)
RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical 30 ft. cable with connectors for controller
   
Manual/Emergency Drive Handcranks for Az and El, Knob on Pol axis
   
Transit Configuration:  
Three rugged, weather-resistant plastic cases, total weight: 450 lbs.
2020 Motorized Positioner 26" x 24" x 30", 170 lbs
Outriggers/Feed Boom/Ku or Ka Feed 71” x 18” x 19”, 110 lbs. (includes Ku or Ka feed)
Reflector Panels 38” x 38” x 22”, 170 lbs.
Additional Feeds 43” x 27” x 20”, 70 lbs. typical, dependent on feed options selected (optional)
Set-up Time Less than 15 minutes.
 
ENVIRONMENTAL SPECIFICATIONS
   
Wind – Survival 80 mph in zenith position
Wind - Operational: ▼
Without Anchoring 30 mph
With Anchoring 30 mph gusting to 45 mph
   
Pointing Loss in Wind:
Ku-band 0.1 dB typical, 0.5 dB max
Ka-band 1.0 dB typical, 2 dB max
   
Temperature:
Operational -22° to 125° F (-30° to 52° C)
Survival -40° to 140° F (-40° to 60° C)
 
RF / ELECTRICAL SPECIFICATIONS Receive Transmit
     
Feed Type Std. 2-Port Precision Ku
DBS bands available upon request



Frequency Range (GHz) 10.95 - 12.75 13.75 - 14.50
Polarization Configuration Orthogonal Linear, Optional Copol Linear
Gain (mid-band) @ Horn Interface (dBi) 46.0 dBi 47.6 dBi
VSWR 1.30:1  
-3dB Beamwidth (midband) 0.9° 0.7°
Antenna Noise Temperature (midband) 54° K
Radiation Pattern Compliance FCC 25.209, ITU-R S.580-6, IESS 208
Maximum Feed Transmit (Tx) Power   500 watts per port
G/T with LNB, midband 25.7 dB/° K (with 50° K LNB)  
     
Cross-Polarization Isolation:    
On-axis within pointing cone 35 dB 35 dB
Within pointing cone Std: 28 dB MM: 25 dB Std: 30 dB MM: 35 dB
Linear Cross-Pol Isolation (in pointing cone) option option
Feed Port Isolation – TX to RX (dB) 35 80 (includes filter)
     
 
CONTROLLER SPECIFICATIONS: STANDARD
   
Controller Type Std. Auto-Acquire with Opt. Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface Menu-driven display w/ keypad
Input Power 115/230 VAC (at rack); up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing
 
CONTROLLER SPECIFICATIONS: OPTIONAL
   
Controller Type Opt. Enhanced Auto-Acquire with Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface Intelligent/simple GUI for on-board or remote CFE laptop
Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing
 
Available Options, Upgrades & Services
 
Optional:
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Controller options – see above
• Spare parts kit

 
Technical Specifications Diagram
Inquire