Output Parameters |
Output Frequency |
950-1700MHz (for X to L) (depends on frequency bands selection) |
|
70 ± 18MHz (140MHz optional) (for X to IF) |
Impedance |
50Ω |
VSWR |
1.5:1 |
Input Power |
+5dBm min |
|
| |
Input Parameters |
Input Frequency |
7.25 to 7.75GHz |
Impedance |
50Ω |
VSWR |
1.5:1 |
|
| |
Transfer Parameters |
Frequency spectrum |
User selectable (for IF to C)
|
Gain Flatness |
±0.75dB over 36 MHz Bandwidth |
|
±1.5dB over Full Bandwidth |
Gain Stability |
±0.25dB over 24 hours at constanttemperature |
In Band Spurious |
|
Carrier dependent |
-55dBc at max gain |
Carrier Independent |
-70dBm max |
Out Band Spurious exclude LO |
-50dBm max |
Third order intermodulation products |
35dBc @ 2 carriers 2MHz apart, 8dB backoff from Prated for each carrier |
Phase Noise |
|
@1KHz |
-73dBc/Hz |
@10KHz |
-83dBc/Hz |
@100KHz |
-93dBc/Hz (for X to IF) |
@1KHz |
-75dBc/Hz |
@10KHz |
-85dBc/Hz |
@100KHz |
-95dBc/Hz (for X to L) |
|
| |
Rear Panel Connections |
IF/L Output |
BNC Female (for X to IF) |
|
N-Type Female (for X to L) |
RF Band Input |
SMA Female |
10MHz Ext REF Connector |
BNC Female |
(Optional) |
|
Remote Connector |
DB 9 Female |
Power IN |
AC/DC |
|
| |
Monitor and Control |
Interface |
RS232/ RS485/ SNMP (Optional) |
Monitoring parameters |
LO & Temperature Alarms |
Control Parameters |
Gain Adjustment @ 0.5dB Step |
|
| |
Power Supply |
AC Input Voltage |
100 to 240VAC 50/60Hz |
Power Consumption |
35W |
|
| |
Environmental |
Operating temperature |
0ºC to 50ºC |
Humidity |
up to 95% (Non-condensing) |
|
| |
Mechanical |
Dimension |
480L x 330W x 44H mm |
Weight |
3.5kg (for C to L) |
|
4.0kg (for C to IF) |
|
| |
Compliance Standard |
Inquire |
|
| |
