TYPICAL SPECIFICATIONS
|
|
|
RF Frequency |
(Universal Ku-band) |
Low Band: |
10.7 to 11.7 GHz |
High Band: |
11.7 to 12.75 GHz |
|
|
IF Frequency |
|
Low Band:
|
950 to 1,950 MHz |
High Band:
|
1,100 to 2,150 MHz |
|
|
Local Frequency |
|
Low Band:
|
9.75 GHz
|
High Band:
|
10.6 GHz |
|
|
Input Interface |
Waveguide, WR75 (with Groove) |
Output Interface |
F-type, female (75 ohm)
|
Noise Figure (at +25 C) |
0.8 dB typ. |
Conversion Gain (at +25 C) |
48 dB min., 62 dB max. |
Input Voltage |
+24 VDC (+12 to +24 VDC) |
|
|
L.O. Phase Noise (SSB) |
|
@ 100 Hz |
-50 dBc/Hz max. |
@ 1 kHz |
-70 dBc/Hz max. |
@ 10 kHz |
-75 dBc/Hz max. |
@ 100 kHz |
-85 dBc/Hz max. |
|
|
L.O. Leakage Level |
|
at the IF Output Connector |
-40 dBm max. |
at the RF Input Flange |
-60 dBm max. |
|
|
Spurious |
|
Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). |
-120 dBm max.at input
|
With test CW signal -10 dBm IF output (Measured at specified IF band). |
-40 dBc max. |
|
|
Input V.S.W.R. |
2.5 : 1 typ. |
Output V.S.W.R. |
2.3 : 1 max. |
Power Requirement |
+24 VDC (+12 to +24 VDC) |
Current Drain |
200 mA max. |
|
|
Mechanical & Environmental ▼ |
|
Temperature Range (ambient) |
-40 to +60 C (operating) -40 to +80 C (storage) |
Dimension & Housing (without Interface Connectors/Switches) |
82.2 mm (L) x 40 mm (W) x 40 mm (H) [3.24" (L) x 1.57" (W) x 1.57" (H)] |
Weight |
240 g [0.53 lbs] |