Foxcom Platinum PL7130T1550/PL7130R10, 10MHz Reference RF Link High Power Input, 10 dB Optical Budget
Foxcom Platinum PL7130T1550/PL7130R10, эталонный радиочастотный канал 10 МГц, вход высокой мощности, оптический бюджет 10 дБ
Модель: Foxcom_PL7130R10
Foxcom Platinum PL7130T1550/PL7130R10 , 10MHz Reference RF Link High Power Input, 10 dB Optical Budget
 |
||
| Summary | ||
| Foxcom Platinum PL7130T1550/PL7130R10 , 10MHz Reference RF Link High Power Input, 10 dB Optical Budget Foxcom’s Platinum 10 MHz card is designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 10 dB optical budget with thePL7130R10 receiver. Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability. Each low profile individual transmitter or receiver can be “hot swapped” in the chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications. The PL7130T1550 transmitter and PL7130R10 receiver are designed for subrack chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required. | ||
| Order Diagram - Options | ||
 |
||
Foxcom Platinum PL7130T1550 / PL7130R10 , 10MHz Reference RF Link High Power Input, 10 dB Optical Budget
| RF Specifications | Units | Typical | Minimum | Maximum |
| Frequency Range - Bandwidth | MHz | 10 | ||
| Amplitude Response @ Unity Gain 5 ± 1 MHz |
dB |
±0.2 |
±0.25 |
|
| Gain Stability | dB/24hr | ± 0.2 | ± 0.25 | |
| Gain Slope | dB | +1.0 | ||
| Gain Variation over temperature | dB | -2 | 2 | |
| DR (Dynamic Range - single channel)1 | dB | 30 | ||
| Noise Figure (NF)2 | dB | 24 | 23 | 26 |
| Input/Output Impedance | Ohm | 50 or 75 | ||
| 1 dB Compression Point | dBm | 2 | 3 | |
| Phase Noise3 | dBm | None | ||
| Input Signal Range - Total Power | dBm | -25 | 0 | |
| Maximum Input without Damage | dBm | +15 | ||
| Output Signal Range [total power]4 | dBm | -25 | +5 | |
| TX/RX Input/Output Return Loss 50 Ohm 75 Ohm |
dB | -18 -15 |
-18 -15 |
|
| Test Port [front panel sample port] | dB | -20 | -22 | -18 |
| RF Connector Input/Output Test Port |
F, SMA, BNC, N F, BNC |
|||
| Optical Specifications | Units | Typical | Minimum | Maximum |
| Optical Wavelength | nm | 1550 | ||
| Optical Power Output | mW / dBm | 2 / 3 | ||
| Optical Budget / Distance | dBm/Km | 1550 nm / 40 | ||
| RX Optical Input Power | dBm | -7 | -8 | 4 |
| Optical Connector | Type | FC/APC or SC/APC (E2000 option) |
- | |
| Optical Return Loss | dB | -60 | -55 | |
| Electrical Specifications | ||||
| Supply Voltage | Vdc | 12 | ||
| Supply Current [TX]5 | Amps | 0.5 | ||
| Supply Current (RX) | Amps | 0.45 | ||
| EMI Rating | EMI Rating: FCC Class B CE Mark |
|||
| Physical Specifications | ||||
| Operating Temperature Range | ºC | -10 | +55 | |
| Storage Temperature Range | ºC | -45 | +85 | |
| Relative Humidity | 95% non-condensing | |||
| Altitude | ft / Km | 10,000 [3.08 ] operating6 14,000 [12.2] non-operating |
||
| Dimensions [D×W×H] | ins/cm | 12×0.8×4 / 30.5×2×10.2 | ||
| Weight | lbs./Kg | 0.5 / 0.23 | ||
| MTBF | Hours | TX: 309,481 RX: 359,057 |
||
| MTTR | Hours | 0.083 | ||
| Shock & Vibration | Designed for normal transportation environment per section 514.4 MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration. |
|||
1. User adjustable |
||||