Foxcom Gold GL7430 85082 RF Link Wide диапазон [10-2150 МГц], Оптический бюджет 4 дБ
Foxcom Gold GL7430 85082 RF Link Wide Band [10–2150 МГц], оптический бюджет 4 дБ
• Оптимизирован для профессиональных спутниковых и беспроводных приложений
• Широкий динамический диапазон
• Расстояние передачи 10 км
• Возможность выбора AGC/MGC
• Тестовый порт на передней панели
• Мощные функции мониторинга
• Совместимость со всеми продуктами спутникового освещения 1-го поколения
Foxcom Gold GL7430 85082 RF Link Wide Band [10-2150MHz], 4dB Optical Budget
Summary | ||
Foxcom Gold GL7430 85082 RF Link Wide Band [10-2150MHz], 4dB Optical Budget Foxcom's Sat-Light/Gold Wideband Optical Link offers a high performance, cost effective alternative to conventional coaxial-cabled systems. Sat-Light/Gold L-Band IFL covers the range of 10 to 2200MHz. The Gold Series Wideband link is designed for a wide range of satellite and wireless applications. Foxcom’s high dynamic range DFB laser delivers exceptional signal quality for the most demanding of requirements. The new Sat-Light Gold series is compatible with first generation Sat-Light 7000 Series platform .The Gold Series support L-Band, 70/140MHz IF, Wide Band (10-2200 MHz), 10MHz Reference, Redundancy, M & C, SNMP, Ethernet, and Serial Data Communication. The link consists of a high dynamic range optical transmitter, which converts incoming RF signals into optics, and an optical receiver that re-converts the optical signal back into RF. All satellite modulation schemes are accommodated –digital or analog. Inherently low phase is achieved by direct modulation of the laser diode. . | ||
Order Diagram - Options | ||
Foxcom Gold GL7430 85082 RF Link Wide Band [10-2150MHz], 4dB Optical Budget
RF Specifications | Units | Typical | Minimum | Maximum |
Frequency Range | MHz | 10-2200MHz | ||
Link Gain | dB | Adjustable | -10 | +10 |
Amplitude Response @ Unity Gain 10-2150MHz any 36 MHz |
dB | ±2.25 ±0.3 |
±2.5 ±0.4 |
|
Gain Stability | dB/24hr | ±0.25 | ±0.3 | |
SFDR1 | dB/Hz2/3 | 102 | 100 | |
CNR [any 36 MHz]1 | dB | 55 | 52 | |
Noise Figure (NF)1 | dB | 18 | 21 | |
Output IP3 (OIP3) 2 | dB | +20 | +15 | |
Third Order InterModulation [IMD]3 | dBc | Adjustable | 55 | 40 |
Group Delay Variation- linear 10 to 60 MHz 60 - 2150MHz |
ns | 14 2 |
||
Input Signal Range - Total Power7 | dBm | -25 | 0 | |
RF Output Signal Range - Total Power | dBm | -25 | +5 | |
Maximum Input without Damage | dBm | +15 | ||
Input/Output Impedance | 75 or 50 | |||
TX/RX Input/Output return loss 50 Ohm 75 Ohm |
dB | -15 -13 |
-15 -13 |
|
RF Connector Type Input/Output Test Port |
F, SMA BNC |
|||
Test Port [front panel sample port] | dB | -20 | -22 | -18 |
Optical Specifications | Unit | Typical | Minimum | Maximum |
Optical Power Output | dBm | 3 | 2 | 4 |
Optical Budget / Distance 4 dB optical budget |
dB/Km | 1310 nm | 1550 nm 8 |15 |
||
Optical Connector Types | FC/APC or SC/APC | |||
Optical Wavelength | nm | 1310/1550/CWDM | ||
Electrical Specification | ||||
Supply Voltage | Vdc | 13 | 12.7 | 18 |
Supply Current [TX]5 | Amps | 0.4 | ||
Supply Current (RX) | Ampls | 0.3 | ||
Physical Specifications | ||||
Operating Temperature Range | -10 | +55 | ||
Dimensions [D×W×H] | ||||
MTBF | TX: 309, 481 RX: 359, 057 |
|||
1. -5dBm RF input, unity gain, IMD=-40 dBc @ 1 meter Fiber |