Foxcom Gold GL 7230 RF Оптический UpLink L-диапазон [950-2220 МГц], Оптический бюджет 4 дБ

Foxcom Gold GL 7230 RF Optical UpLink L-Band [950–2220 МГц], оптический бюджет 4 дБ

Модель: Foxcom_GL7230



Summary
Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget Foxcom's Sat-Light/Gold L-Band Interfacility Link offers a high performance, cost effective alternative to conventional coaxial-cabled systems. Sat-Light/Gold L-Band IFL covers the range of 950 to 2200MHz. The Gold Series L-Band link is designed for a wide range of satellite uplinking facilities whereby high input power levels are required. Foxcom’s high dynamic range DFB laser delivers exceptional signal quality for the most demanding of uplink applications. The new Sat-Light Gold series is compatible with first generation Sat-Light 7000 Series platform. The Gold Series support L-Band, 70/140MHz IF, Wide Band (10-2200 MHz), 10MHz Reference, Redundancy, M & C, SNMP, Ethernet, and Serial Data Communication. The link consists of a high input power optical transmitter, which receives the RF signal from an L-band modem, and an optical receiver that connects to the antenna BUC. All satellite modulation schemes are accommodated –digital or analog. Inherently low phase is achieved by direct modulation of the laser diode.

Order Diagram - Options

RF Specifications	Units	Typical	Minimum	Maximum

Frequency Range	MHz	950-2150MHz
Link Gain	dB	Adjustable	-10	+10
Amplitude Response @ Unity Gain 950-2150MHz any 36 MHz	dB	±2 ±0.25		±2.2 ±0.3
Gain Stability	dB/24hr	±0.25		±0.3
SFDR1	dB/Hz2/3	103	100
CNR [any 36 MHz]1	dB	54	52
Noise Figure (NF)2	dB	18		21
Output IP3 (OIP3) 3	dBm		+15
Third Order InterModulation [IMD]4	dBc	Adjustable	55	40
Group Delay Variation- linear 950 - 2150MHz	ns	4		5
Input Signal Range - Total Power	dBm		-30	-5
RF Output Signal Range - Total Power	dBm		-25	0
Maximum Input without Damage	dBm		+15
Input/Output Impedance	75 or 50
TX/RX Input/Output return loss 50 Ohm 75 Ohm	dB	-14 -12		-14 -12
RF Connector Type Input/Output Test Port		F, SMA BNC
Test Port [front panel sample port]	dB	-20	-22	-18


Optical Specifications	Unit	Typical	Minimum	Maximum

Optical Power Output	dBm	3	1	4
Optical Budget / Distance 4 dB optical budget	dB/Km	1310 nm \| 1550 nm 8 \|15
Optical Connector Types		FC/APC or SC/APC
Optical Wavelength	nm	1310/1550/CWDM


Electrical Specification

Supply Voltage	Vdc	13	12.7	18
Supply Current [TX]5	Amps	0.4
Supply Current (RX)	Ampls	0.3


Physical Specifications

Operating Temperature Range			-10	+55
Dimensions [D×W×H]
MTBF	Hours	TX: 309, 481 RX: 359, 057

1. 0dBm RF input, unity gain, IMD=-40 dBc @ 1 meter Fiber 2. -25dBm RF input, 20dB Gain, IMD=-40 dBc 3. 0dBm RF Output, IMD=-40dBc 4. User adjustable 5. Under 10ºC add 120 mA [laser heating]