AvL 1215 1,2m Ручная или Моторизованная Летающая Военная Компактная Портативная Антенна Ka-Диапазона

AvL 1215 1,2 м ручной или моторизованный FlyAway Военная легкая компактная портативная антенна Стандартная 2-портовая Ka-диапазон

IKtechcorp является дистрибьютором AVL Antanna Systems, ведущего производителя и поставщика коммерческого спутникового оборудования. AVL Technologies предлагает широкий спектр антенн, используемых в VSAT, DTH, COTM, телепортации, кабельном и вещании. Спутник, DTH, VSAT, Flyaway, быстрое развертывание, только прием, RF, моторизованная автоматическая точка, автомобильные антенны
• Канал Rx/Tx: 2-портовый военный Ka-Band
- Прием:
- Передача: <

Модель: avl_1215_ka_mil

Цена по запросу

Описание

Характеристики

Документация

AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band

Summary

AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band
AvL’s 1.2m Manual FlyAway Antenna System weighs 62 lbs assembled with a Ku-band feed, and is compact enough to fit into two ballistic nylon cases. The robust carbon fiber reflector and tripod base are rugged enough for operations in harsh conditions. The antenna’s tripod base can be anchored to increase wind resistance, and the antenna assembles in 5 minutes.

AvL’s Manual FlyAway Antennas are lightweight, compact, portable, and robust with carbon fiber reflectors and easy-to-assemble tripods. AvL’s Az/El positioners feature easy pointing as well as fine-tuning, and are easy and quick to assemble. As with all AvL antenna systems, the Manual FlyAway Antennas interface with any modem, RF electronics, or satellite service, and achieve pointing accuracy and pointing stability even in the most extreme conditions.
AvL 1215 Ka-Band Manual or Motorized FlyAway Military Antenna feature:
• 1.2m, 4 piece Carbon Fiber Reflector
• Lightweight, compact and portable in two small cases
• Fast interchangeable feed system with tri-band capability: Ku, Ka and X; DBS capable
• Assembles in less than 5 minutes
• Feed rotation for polarization
• Easy pointing and fine-tuning Az/El positioner
• Manual actuators enable full range of motion
• Tripod legs can be anchored to increase wind resistance
• Single- or multi-band options for worldwide operation
• Prime focus offset optics with global mode-matched feed
• Manual actuators enable full range of motion
• Quick set-up operational in minutes
• Interface with all types of RF electronics and services
• Numerous packaging options including backpacks and rugged cases
While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram

Inquire

AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band

MECHANICAL SPECIFICATIONS

Reflector Construction 1.2m segmented 4 piece Carbon Fiber

Axis Travel: ▼

Azimuth Coarse: 360 degree continuous / Fine: ±10°

Elevation Coarse: 5-90° / Fine: 5-90°

Polarization ±95°

RF Interface: ▼

BUC Mounting Feed Boom (10 lbs max), or Remote

Coax Two connectors at Amplifiers

Electrical Interface Connectors at Amplifiers

Stowed Configuration & Weights: ▼

Reflector 36” x 25” x 5”, weighs 18 lbs

El Positioner 25” x 16” x 9”, weighs 13.7 lbs.

Az Positioner/Base 8.5” x 8.5” x 8”, weighs 14.3 lbs

Legs (3x) 9” x 5” x 20” (each), weights 2.7 lbs

Ku Feed/Feed Boom/Struts 34” x 4” x 8”, weighs 8lbs

Case Integration Antenna fits into 2 ballistic nylon case, less than 50lb per case

Total Weight 62 lbs. (with KU Precision Feed)

Note: BUC and LNB are CFE

ENVIRONMENTAL SPECIFICATIONS

Wind - Survival Deployed: 60 mph (97 kph) (ballasted); Stowed: 90 mph (145 kph)

Wind - Operational 30 mph (48 kph), Gusts to 45 mph (72 kph)

Pointing Loss in Wind (Ka RX):

With optional controls and/or motors 1.4 dB typical / 2.0 dB max

Temperature:

Operational -22°F to 125°F (-30°C to 52°C)

Survival -40°F to 140°F (-40°C to 60°C)

RF / ELECTRICAL SPECIFICATIONS Receive Transmit

Feed Type ► Opt. 2-Port Ka-Band Military

Frequency Range (GHz) 20.2 - 21.2 30.0 - 31.0

Polarization Configuration Circular (opt. linear feed available)

Gain (mid-band) 44.6 dBi 47.9 dBi

-3dB Beamwidth (mid-band) 1.2˚ 0.8˚

Radiation Pattern Compliance FCC 25.209, MIL-STD-188-164A

Maximum Feed Transmit (Tx) Power
250 watts

Antenna Noise Temperature (midband) 107˚ K

G/T, midband, clear horizon 21.1 dB/˚ K (100˚ LNB)

Axial Ratio (Ka and X only, within pointing cone) 1.5 dB 1.0 dB

VSWR 1.30:1 1.30:1

Feed Port Isolation - Tx to Rx (dB) 35 dB 80 dB (incl. filter)

CONTROLLER SPECIFICATIONS

Controller Type ► Optional AvL AAQ – Motorized or Computer-Assisted Pointing (CAP)

Enhanced Auto-Acquire with Std. Ethernet IP Interface

Integration Embedded w/ Ethernet IP interface (P/S optional) (optional rack- or shelf-mount P/S available)

User Interface Intelligent/simple GUI for on-board or remote CFE laptop

Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; 250W

Software Upgrades/Options
(Motorized) Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

• Upgrade from 2-Port Precision Ku Feed to: a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku; b) 2-Port X MIL; c) 2-Port Ka MIL; d) 2-Port Ka Comm.
• Add co-polarization Kit (for 2-port Ku feeds only) - configures Rx and Tx to same polarization sense ) (may require second case) 
• Add BUC/HPA mounting (NOTE: minimum elevation may be restricted by these options) ) (may require second case)
• Upgrade to custom RF/IF I/O cabling configurations available
• Custom colorization (contact factory for available colors)
• Add custom logo on reflector face (1- or 2-Color; per AvL Logo Policy)
• Upgrade from standard manual pointing to AvL AAQ Enhanced Auto-Acquire (see Controller section, above, for some of these options) (may require second case)
• Add power supply for AAQ Controller upgrade (requires second case)
• Spare parts kit * Outside main beam
** Contact Sales for commercial Ka-band frequency range options and circular or linear polarization options.
*** Excluding optional filters

Technical Specifications Diagram

Inquire

Compliance Standard

Inquire

AVL 1215 Antenna Datasheet (258.61KB)



Summary
AvL 1215 1.2m Manual or Motorized FlyAway Military Lightweight Compact Portable Antenna Standard 2-Port Ka-Band AvL’s 1.2m Manual FlyAway Antenna System weighs 62 lbs assembled with a Ku-band feed, and is compact enough to fit into two ballistic nylon cases. The robust carbon fiber reflector and tripod base are rugged enough for operations in harsh conditions. The antenna’s tripod base can be anchored to increase wind resistance, and the antenna assembles in 5 minutes. AvL’s Manual FlyAway Antennas are lightweight, compact, portable, and robust with carbon fiber reflectors and easy-to-assemble tripods. AvL’s Az/El positioners feature easy pointing as well as fine-tuning, and are easy and quick to assemble. As with all AvL antenna systems, the Manual FlyAway Antennas interface with any modem, RF electronics, or satellite service, and achieve pointing accuracy and pointing stability even in the most extreme conditions. AvL 1215 Ka-Band Manual or Motorized FlyAway Military Antenna feature: • 1.2m, 4 piece Carbon Fiber Reflector • Lightweight, compact and portable in two small cases • Fast interchangeable feed system with tri-band capability: Ku, Ka and X; DBS capable • Assembles in less than 5 minutes • Feed rotation for polarization • Easy pointing and fine-tuning Az/El positioner • Manual actuators enable full range of motion • Tripod legs can be anchored to increase wind resistance • Single- or multi-band options for worldwide operation • Prime focus offset optics with global mode-matched feed • Manual actuators enable full range of motion • Quick set-up operational in minutes • Interface with all types of RF electronics and services • Numerous packaging options including backpacks and rugged cases While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation. AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

Technical Specifications Diagram
Inquire