AvL 1220FA 1,6m SNG Моторизованная Трехдиапазонная пролетная Антенна Ku-Band

AvL 1220FA 1,6 м SNG моторизованная трехдиапазонная FlyAway антенна 2-портовая прецизионная Ku-диапазон (стандартная кросс-Pol comp.)

IKtechcorp является дистрибьютором AVL Antanna Systems, ведущего производителя и поставщика коммерческого спутникового оборудования. AVL Technologies предлагает широкий спектр антенн, используемых в VSAT, DTH, COTM, телепортации, кабельном и радиовещании. DTH, VSAT, Flyaway, быстрое развертывание, только прием, RF, моторизованная автоматическая точка, автомобильные антенны
• Rx/Tx Feed: 2-Port Precision Ku-Band (LP)
- Прием: 10,95–12,75 ГГц
- Передача: 13,75–14.

Модель: avl_1220fa_ku

Цена по запросу

Описание
Характеристики

AvL 1220FA 1.6m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)



Summary
AvL 1220FA 1.6m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.) AvL's Model 1.6m 1220 FlyAway SNG antenna systems offer enhanced wind performance in a lightweight, portable, 2-man lift package. All 1220FA FlyAway SNG antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes. AvL’s FlyAway SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service. AvL 1220FA Ku-Band 1.2m SNG Systems feature: • Packs into two rugged cases • Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation • 1.6m Segmented 4-piece Carbon Fiber Reflector • Easy 2-man lift - weighs <150 lbs • 1220 case-based positioner • Tri-band feed capability: -Ku-Band (LP) -Ka-Band (LP or CP) -X-Band (CP) -C-Band (LP or CP) available for some international locations • Az/El drive system with patented AvL Cable Drive Positioner • Elevation over azimuth mount geometry • Polarization adjustment by motorized rotation of linear feeds • Case-based systems with the positioner integrated into one case for stability and ease of set-up • Fully compliant for FCC, Intelsat and WGS • One button auto-acquisition controller • 15-Minute Setup

Technical Specifications Diagram
Inquire

AvL 1220FA 1.6m SNG Motorized Tri-Band FlyAway Antenna 2-port Precision Ku-Band (Standard Cross-Pol comp.)

MECHANICAL SPECIFICATIONS

Az/El Drive	Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System	Motorized Rotation of Feed
Reflector Construction	1.6m Segmented 4-piece Carbon Fiber

*Axis Travel* ▼
Azimuth	±200°
Elevation (operational)	0° - 90° with ±200° Az Travel
Polarization (LP feeds)	±95° Adjustable within <1°

*Az/El Speed:* ▼
Slewing/Deploying (typical)	2°/sec Elevation: 1°/sec El
Peaking (typical)	0.2°/sec
Tracking (typical)	0.1°/sec

Motors	24 VDC Variable Speed, Constant Torque

*Standard Interfaces:* ▼
BUC Mounting	Feed boom or behind reflector (additional CFE case or optional case required)
RF	Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical	30 ft. cable with connectors for controller

Manual/Emergency Drive	Handcranks for Az and El, Knob on Pol axis

*Transit Configuration:* ▼
Three rugged weather-resistant plastic cases, total weight 375 lbs.
1220 Motorized Positioner	26" x 24" x 30", 150 lbs
Outriggers/Feed Boom	71” x 18” x 17”, 105 lbs. (includes Ku or Ka feed)
Reflector Panels	39” x 39” x 24”, 120 lbs.
Additional Feeds	43” x 28” x 21”, 70 lbs typical, dependent on feed options selected
C/X/Ka Feeds (up to 3 per case)	43” x 27” 20”, 70 lbs. typical (optional)
Set-up Time	Less than 15 minutes.

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival	80 mph in zenith position
*Wind - Operational*: ▼
Without Anchoring	30 mph
With Anchoring	30 mph gusting to 45 mph

*Pointing Loss in Wind:* ▼
Ku-band	0.4 dB typical, 0.7 dB max in operational wind
Ka-band	1.0 dB typical, 1.7 dB max in operational wind

*Temperature:* ▼
Operational	-22° to 125° F (-30° to 52° C)
Survival	-40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	Std. 2-Port Precision Ku

Frequency Range (GHz)	10.95 - 12.75	13.75 - 14.50
Polarization Configuration	Orthogonal Linear, Optional Copol Linear
Gain (mid-band) @ Horn Interface (dBi)	43.7 dBi	45.3 dBi
Antenna Noise Temperature (midband)	54° K
Radiation Pattern Compliance	IESS-601 Std. G and FCC 47CFR25.209
Maximum Feed Transmit (Tx) Power		500 watts per port
G/T with LNB, midband	23.5 dB/° K (with 50°K LNB)

*Cross-Polarization Isolation:* ▼
On Axis (minimum)	35 dB	35 dB
Within pointing cone	Std: 28 dB MM: 25 dB	Std: 30 dB MM: 35 dB

CONTROLLER SPECIFICATIONS: STANDARD

*Controller Type* ►	*Std. Auto-Acquire with Opt. Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface	Menu-driven display w/ keypad
Input Power	115/230 VAC (at rack); up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

*Controller Type* ►	*Opt. Enhanced Auto-Acquire with Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Controller options – see above
• Spare parts kit

Technical Specifications Diagram

Inquire