Добро пожаловать в IK Tech Corporation
Одна остановка для всех спутниковых потребностей

AvL 1220FA 1,6m Военная Моторизованная Трехдиапазонная Антенна X-Band

AvL 1220FA 1,6m Военная Моторизованная Трехдиапазонная Антенна X-Band

AvL 1220FA 1,6 м военная моторизованная трехдиапазонная FlyAway антенна, 2 порта Precision X-Band

IKtechcorp является дистрибьютор AVL Antanna Systems, ведущего производителя и поставщика коммерческого спутникового оборудования. AVL Technologies предлагает широкий спектр антенн, используемых в VSAT, DTH, COTM, телепортации, кабельной и широковещательной отраслях. Спутник, DTH, VSAT, Flyaway, быстрое развертывание , только прием, RF, моторизованная автомобильная точка, автомобильные антенны
• Rx/Tx Feed: 2-портовый X-диапазон (Military/WGS)
- Прием: 7,25–7,75 ГГц
- Передача:
7,9–8,4 ГГц
<

Модель: avl_1220fa_x

AvL 1220FA 1.6m Military Motorized Tri-Band FlyAway Antenna 2-port Precision X-Band

AvL 1220FA 1.6m SNG/Military Motorized Tri-Band FlyAway Antenna 2-port Precision X-Band Product Picture, Price, Image, Pricing
 
Summary

AvL 1220FA 1.6m Military Motorized Tri-Band FlyAway Antenna 2-port Precision X-Band

AvL's Model 1.6m 1220 FlyAway Military antenna systems offer enhanced wind performance in a lightweight, portable, 2-man lift package. All 1220FA FlyAway Military antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes.

AvL’s FlyAway Military antennas  are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability.

Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service.

AvL 1220FA X-Band 1.6m Military Systems feature:
• Packs into two rugged cases
• Enhanced wind tolerance of 45 mph gusting to 60 mph for Ku operation
• 1.6m Segmented 4-piece Carbon Fiber Reflector
• Easy 2-man lift - weighs <150 lbs
• 1220 case-based positioner
• Tri-band feed capability:
-Ku-Band (LP)
-Ka-Band (LP or CP)
-X-Band (CP)
-C-Band (LP or CP) available for some international locations
• Az/El drive system with patented AvL Cable Drive Positioner
• Elevation over azimuth mount geometry
• Polarization adjustment by motorized rotation of linear feeds
• Case-based systems with the positioner integrated into one case for stability and ease of set-up
• Fully compliant for FCC, Intelsat and WGS
• One button auto-acquisition controller
• 15-Minute Setup

While the vast majority of military applications to date have relied on commercial satellite interoperability, especially at Ku-band, AvL is now leading the industry in the delivery of systems that will operate over the next generation of military satellites, including Xtar (X-band) and the new US Army Wideband Global Satellite (WGS) constellation (X- and Ka-band). Most of our military antennas can be offered with upgradability to X- and Ka-bands of operation.

AvL antennas interface easily with all RF systems and are compliant with FCC and Intelsat requirements for 2° spacing as well as optional models for meeting Eutelsat and Asiasat criteria. AvL antennas are also in the certification process for operation over the US Army DSCS and WGS satellites.

 

     
Technical Specifications Diagram    
Inquire

AvL 1220FA 1.6m Military Motorized Tri-Band FlyAway Antenna 2-port Precision X-Band

MECHANICAL SPECIFICATIONS
   
Az/El Drive Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System Motorized Rotation of Feed
Reflector Construction 1.6m Segmented 4-piece Carbon Fiber
   
Axis Travel
Azimuth ±200°
Elevation (operational) 0° - 90° with ±200° Az Travel
Polarization (LP feeds) ±95° Adjustable within <1°
   
Az/El Speed:
Slewing/Deploying (typical) 2°/sec Elevation: 1°/sec El
Peaking (typical) 0.2°/sec
Tracking (typical) 0.1°/sec
   
Motors 24 VDC Variable Speed, Constant Torque
   
Standard Interfaces:
BUC Mounting Feed boom or behind reflector (additional CFE case or optional case required)
RF Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical 30 ft. cable with connectors for controller
   
Manual/Emergency Drive Handcranks for Az and El, Knob on Pol axis
   
Transit Configuration:  
Three rugged weather-resistant plastic cases, total weight 375 lbs.
1220 Motorized Positioner 26" x 24" x 30", 150 lbs
Outriggers/Feed Boom 71” x 18” x 17”, 105 lbs. (includes Ku or Ka feed)
Reflector Panels 39” x 39” x 24”, 120 lbs.
Additional Feeds 43” x 28” x 21”, 70 lbs typical, dependent on feed options selected
C/X/Ka Feeds (up to 3 per case) 43” x 27” 20”, 70 lbs. typical (optional)
Set-up Time Less than 15 minutes.
 
ENVIRONMENTAL SPECIFICATIONS
   
Wind – Survival 80 mph in zenith position
Wind - Operational: ▼
Without Anchoring 30 mph
With Anchoring 30 mph gusting to 45 mph
   
Pointing Loss in Wind:
Ku-band 0.4 dB typical, 0.7 dB max in operational wind
Ka-band 1.0 dB typical, 1.7 dB max in operational wind
   
Temperature:
Operational -22° to 125° F (-30° to 52° C)
Survival -40° to 140° F (-40° to 60° C)
 
RF / ELECTRICAL SPECIFICATIONS Receive Transmit
     
Feed Type Opt. 2-Port X (Military/WGS)



Frequency Range (GHz) 7.25 - 7.75 GHz 7.9 - 8.4 GHz
Polarization Configuration Circular RHCP or LHCP
Gain (mid-band) @ Horn Interface (dBi) 39.7 dBi 40.5 dBi
Antenna Noise Temperature (midband) 45° K
Radiation Pattern Compliance MIL-STD-188-164A
Maximum Feed Transmit (Tx) Power   1000 watts per port
VSWR 1.30:1 1.30:1
G/T with 50˚ LNB, midband, clear horizon 19.7 dB/° K (with 55°K LNB)  
Axial Ratio (CP only, within pointing cone ) 1.21 dB 2.0 dB

 

 
CONTROLLER SPECIFICATIONS: STANDARD
   
Controller Type Std. Auto-Acquire with Opt. Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface Menu-driven display w/ keypad
Input Power 115/230 VAC (at rack); up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track or TLE track); automatic band sensing
 
CONTROLLER SPECIFICATIONS: OPTIONAL
   
Controller Type Opt. Enhanced Auto-Acquire with Ethernet IP Interface
Standard Feature  
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
   
Integration Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface Intelligent/simple GUI for on-board or remote CFE laptop
Input Power 28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing
 
Available Options, Upgrades & Services
 
Optional:
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Controller options – see above
• Spare parts kit

 
Technical Specifications Diagram
Inquire