AvL 2020FA 2,0m SNG Моторизованная Четырехдиапазонная пролетная Антенна C-Диапазона

AvL 2020FA 1,6 м SNG моторизованная четырехдиапазонная антенна FlyAway с 2 портами, прецизионная, Ku-диапазон (стандартная кросс-политика)

IKtechcorp является дистрибьютором AVL Antanna Systems, ведущего производителя и поставщика коммерческого спутникового оборудования. AVL Technologies предлагает широкий спектр антенн, используемых в VSAT, DTH, COTM, телепортации, кабельном и радиовещании. Спутник, DTH, VSAT, Flyaway, быстрое развертывание, только прием, RF, моторизованная автоматическая точка, автомобильные антенны
• Канал Rx/Tx: 2-портовый C-Band
- Прием: 3,625–4,20 ГГц
- Передача: 5,85–6,425 ГГц
<

Модель: avl_2020fa_2m_c

Цена по запросу

AvL 2020FA 2.0m SNG Motorized Quad-Band FlyAway Antenna 2-port C-Band



Summary
AvL 2020FA 2.0m SNG Motorized Quad-Band FlyAway Antenna 2-port C-Band AvL's Model 2.0m 2020FA FlyAway SNG antenna system offers standard wind performance in a lightweight and portable package. All 2020FA FlyAway SNG antenna systems have positioners integrated into cases for easy set-up; these antennas can be flown anywhere, then set up and operational within minutes. These antenna systems are produced in high volume for a significant U.S. Army program. AvL’s FlyAway SNG antennas are designed to meet and exceed the highest performance requirements around the world to guarantee both satellite authority compliance and peak in performance, reliability and availability. Each Flyaway Antenna is priced to include the AvL carbon fiber antenna and auto-acquisition controller for ease of operation. As with all AvL antenna systems, no laptop is necessary to operate the controller, the antennas interface with any modem, RF electronics, or satellite service. AvL 2020FA C-Band 2.0m SNG Systems feature: • Packs into three or four cases depending on options selected; positioner is integrated into one • 2.0m Segmented 9-piece Carbon Fiber Reflector • 2-man lift • 2220 Rugged/Heavy Duty Case-Based Positioner • Quad-band feed capability: -Ku-Band (LP) -Ka-Band (LP or CP) -X-Band (CP) -C-Band (LP or CP) available for some international locations • Zero Backlash Az/El drive system with patented AvL Cable Drive Positioner • Elevation over azimuth mount geometry • Polarization adjustment by motorized rotation of linear feeds • Case-based systems with the positioner integrated into one case for stability and ease of set-up • Fully compliant for FCC and Intelsat; Eutelsat compliance optional • One button auto-acquisition controller • 15-Minute Setup

Technical Specifications Diagram
Inquire

AvL 2020FA 2.0m SNG Motorized Quad-Band FlyAway Antenna 2-port C-Band

MECHANICAL SPECIFICATIONS

Az/El Drive	Motorized AvL Zero Backlash Cable Drive (Patent Pending)
Polarization Drive System	Motorized Rotation of Feed
Reflector Construction	2.0m Segmented 9-piece Carbon Fiber

*Axis Travel* ▼
Azimuth	±200°
Elevation (operational)	0° - 90° with ±200° Az Travel
Polarization (LP feeds)	±95° Adjustable within <1°

*Az/El Speed:* ▼
Slewing/Deploying (typical)	2°/sec Elevation: 1°/sec El
Peaking (typical)	0.2°/sec

Motors	24 VDC Variable Speed, Constant Torque

*Standard Interfaces:* ▼
BUC Mounting	Feed boom or behind reflector (additional CFE case or optional case required)
RF	Std. 50 ohm Coax (2) at base, cover flange at feed Tx port
Electrical	30 ft. cable with connectors for controller

Manual/Emergency Drive	Handcranks for Az and El, Knob on Pol axis

*Transit Configuration:* ▼
Three rugged, weather-resistant plastic cases, total weight: 450 lbs.
2020 Motorized Positioner	26" x 24" x 30", 170 lbs
Outriggers/Feed Boom/Ku or Ka Feed	71” x 18” x 19”, 110 lbs. (includes Ku or Ka feed)
Reflector Panels	38” x 38” x 22”, 170 lbs.
Additional Feeds	43” x 27” x 20”, 70 lbs. typical, dependent on feed options selected (optional)
Set-up Time	Less than 15 minutes.

ENVIRONMENTAL SPECIFICATIONS

Wind – Survival	80 mph in zenith position
*Wind - Operational*: ▼
Without Anchoring	30 mph
With Anchoring	30 mph gusting to 45 mph

*Pointing Loss in Wind:* ▼
Ku-band	0.1 dB typical, 0.5 dB max
Ka-band	1.0 dB typical, 2 dB max

*Temperature:* ▼
Operational	-22° to 125° F (-30° to 52° C)
Survival	-40° to 140° F (-40° to 60° C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	Opt. 2-Port C – Std. Requires special approval by satellite operator

Frequency Range (GHz)	3.625-4.20 Ghz	5.85 -6.425 Ghz
Polarization Configuration	Circular or Linear
Gain (mid-band) @ Horn Interface (dBi)	36.4 dBi	38.1 dBi
VSWR	1.30:1
-3dB Beamwidth (mid-band)	2.7°	1.7°
Antenna Noise Temperature (midband)	49° K
Radiation Pattern Compliance	FCC 25.209, ITU-R S.580-6, IESS 207
Maximum Feed Transmit (Tx) Power		1000 watts per port
G/T with 50˚ LNB, midband, clear horizon	17.9 dB/° K (with 20°K LNB)
Axial Ratio (CP only, within pointing cone )	2.3 dB	1.3 dB
Cross-Pol Isolation On-axis within pointing cone	35 dB / 30 dB	35 dB / 30 dB
Linear Cross-Pol Isolation (in pointing cone)	>30 dB	>30 dB
Feed Port Isolation – TX to RX (dB)	65	105 (includes filter)

CONTROLLER SPECIFICATIONS: STANDARD

*Controller Type* ►	*Std. Auto-Acquire with Opt. Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S)
User Interface	Menu-driven display w/ keypad
Input Power	115/230 VAC (at rack); up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track or TLE track); automatic band sensing

CONTROLLER SPECIFICATIONS: OPTIONAL

*Controller Type* ►	*Opt. Enhanced Auto-Acquire with Ethernet IP Interface*
*Standard Feature* ▼
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites

Integration	Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W
Software Upgrades/Options	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

Optional:
• BUC/HPA mounting
• Optional 75 ohm coax
• Waveguide interconnect options
• Beacon receiver – inclined orbit tracking – resolvers/upgrade
• Grounding options (lightning conductor)
• Anchoring kit options
• Custom logo on reflector face (1- or 2-color; per AvL Logo Policy)
• Controller options – see above
• Spare parts kit

Technical Specifications Diagram

Inquire

AVL 2020FA 2m Antenna Datasheet (98.83KB)