BELCOM MBLIN-2 2WATT C-диапазон BLOCK UPCONVERTER
Insat Band (Ext.C) Входная частота 975–1275 МГц Выходная частота 6,725–7,025 ГГц Частота гетеродина 5,750 ГГц Выходная мощность (при сжатии 1 дБ) 2 Вт - 33 дБм Синтезированный гетеродин Внешний опорный сигнал Вес : 1,85 кг Размеры: 216 X 136 X 53 мм (216 X 136 X 63 мм mBLC-8) Рабочая температура от -40 до +55 градусов. C Погодозащищенный (включая разъем) Доступен во всех частотах C-диапазона (C-Band, Palapa,
2 Watt BUC Performance Characteristics | |
---|---|
Electrical | |
Input impedance | 50O / 75O |
Input VSWR | 2:1 |
Output power (at 1Gain compr.) | +33dBm (min.) |
Gain(Nominal) | 55±3 dB |
Gain Flatness Over any 36 MHz band Over Frequency Range |
±0.75 dB max ±2.0 dB max |
Gain Stability (over temp.for constant freq.) | ±2.0 dB |
Ref. signal | External 10MHz(std.) 0 ±5dBm |
Spectrum sense | Non Inverting |
Total frequency accuracy | Control by Reference |
Phase noise at 100 Hz offset at 1 KHz offset at 10 KHz offset at 100 KHz offset at 1 MHz offset |
-60 dBc/Hz -70 dBc/Hz -80 dBc/Hz -90 dBc/Hz -100 dBc/Hc |
Leakage and Spurious Signals | |
Up to 1dB comp. In-Band -20 dbm max | |
3rd Order intercept point, IP3 | 46 dbm (min) |
Stability | The unit will not oscillate under any condition of load, temperature or DC supply. |
Protection | |
Thermal runaway protection | |
No failure for any combination of load reflections | |
DC supply spikes protection | |
Missing 10MHz Ref. shuts transmitter to -30dBm max | |
Input DC voltage | +15 to +24V |
DC power consumption (max) | 28W |
Mechanical | |
IF + DC + reference input | 75O, F-type (f) 50O, N-type (optional) |
RF output | CPR-137 |
Weight | 1.85 Kg. |
Finish | White polyurethane paint |
Environmental | |
Operating Temperature | -400C to +550C |
Sealing | Moisture sealing by O-ring |