|
Model
|
GSM7502M
|
|
Laser Illumination
|
|
Detection
|
2000m - 3000m
|
|
Laser Specification
|
|
Laser Light Source
|
1. Consumption: 15W;
2. Wavelength: 810nm;
3. Laser angle: 0.5°～20°;
4. Encapsulation: the illuminator is sealed with inert gas to prevent oxidation;
5. Using distributed laser design, laser emitter and high-temperature components are directly affixed to the shell’s cooling fins, that have stronger heat dissipation capability if compared with the modular laser.
|
|
Laser Len
|
1. Lens form: 60X f1.2-80mm ultra-short focal zoom patented technology, laser 600 micron cross-section imaging lens;
2. Transmittance: multi-layer NIR Anti-reflective coating, high efficiency laser coupling;
3. Homogenization: GHT-II super homogenization HD illumination patented technology, full focus spot brightness equilibrium is > 92%;
4. Laser Safety: Using ZQB safety laser beam processing patented technology, which complying with International IEC60825 Safety Standard;
5. Focus Angle Positioning: Precision digital drive positioning.
Spot form: (Optional: elliptical spot illuminator - the spot always keeps elliptic in the process of change, better matching with 16:9 HD camera picture, where the laser utilization rate increased by 30%)
|
|
Angle and distance matching
|
1. Matching method: Automatic tracking or manually fine-tuning intelligent matching method;
2. Synchronization control: DSS digital stepping illumination angle control technology, 0.1 degree precise servo control;
3. Response time: Z-super laser angle and imaging ratio matching algorithm, tracking response time less than 500 ms;
4. Synchronization effect: Laser synchronization effect adjusts the modes of cut-in, cut-out and full-screen coverage, which can be set arbitrarily according to the scene remotely.
5. Optical axis alignment: SLM double optical axis self-locking alignment device, the accuracy can reach 0.01 degrees, reserve external alignment window, without cover removal maintenance
|
|
Laser Switch
|
1. Control mode: Mandatory opening, mandatory closing and photosensitive automatic control, can be set remotely.
2. Photosensitive synchronous control: independent photosensitive control circuit, precise synchronous switching of laser switch and camera into day-night mode.
3. Data Processing: Built-in Intelligent Anti-Strong Light Jamming Algorithms, Shielding the False Switches Caused by Strong Light at Night
|
|
Visible Camera
|
|
Weather Condition
|
Good
|
Normal (lightly polluted)
|
|
Detection
|
Vehicle: >10000m
|
Vehicle: 8000m
|
|
Human: 3500m
|
Human: 1500m
|
|
Recognition
|
Vehicle: 8000m
|
Vehicle: 6000m
|
|
Human: 2500m
|
Human: 1200m
|
|
Identification
|
Vehicle: 5000m
|
Vehicle: 3000m
|
|
Human: 1200m
|
Human: 500m - 800m
|
|
FOV
|
Wide angle: 38.80o x 33.82o x 19.02o
Long focus: 0.71o x 0.62o x 0.35o
|
|
Camera Specification
|
|
1. Sensor type: 1/1.8 "progressive scan CMOS
2. Minimum illumination: color: 0.0007 lux @ (f1.2, AGC on); black and white: 0.0001 lux @ (f1.2, AGC on)
3. Shutter: 1 second to 1/100000 second
4. Slow shutter: Support
5. Lens interface: Type C/CS interface
6. Automatic diaphragm: DC drive
7. Day night conversion mode: ICR infrared filter
8. Digital noise reduction: 3D digital noise reduction
9. Wide dynamic range: 120dB
10. Focus-a: Support ABF auxiliary focus
Compression standard:
1. Video compression standard: H.265/H.264/MPJEG
2. H.265 coding type: Main profile
3. H.264 encoding type: Baseline profile/main profile/high profile
4. Video compression rate: 32 Kbps ~ 16mbps
5. Audio compression standard: G.711/G.722.1/G.726/mp2l2/aac/pcm
6. Audio compression rate: 64Kbps (G.711)/16kbps (G.722.1)/16kbps (G.726)/32-160kbps (mp2l2)/16-64kbps (AAC)
Image:
1. Maximum image size: 1920 × 1080
2. Main stream resolution and frame rate: 50Hz: 25FPS (1920 × 10801280 × 9601280 × 720), 60Hz: 30fps (1920 × 1080,1280 × 960,1280 ×720)
3. The resolution and frame rate of the third stream are independent of the settings of the main stream, and the maximum support is 50Hz: 25FPS (1920 × 1080); 60Hz: 30fps (1920 × 1080)
4. Image setting: Corridor mode, saturation, brightness, contrast and sharpness can be adjusted by client or browser
5. Image enhancement: Backlight compensation, strong light suppression, fog penetration, electronic anti shake, 3D noise reduction.
6. Day night conversion mode: Automatic, timed, alarm triggered
7. Image overlay: Supports BMP 24 bit image overlay and optional area
8. ROI in region of interest: Supports three bitstreams to set four fixed regions respectively to ensure face details at low bitrate
Network Function:
1. Storage function: Supports micro SD/SDHC/SDXC card (128G) off network local storage, NAS (NFS, SMB/CIFS all support)
2. Intelligent alarm: Motion detection, blocking alarm, network cable disconnection, IP address conflict, memory full, memory error, illegal access
3. Support protocols: TCP/IP, ICMP, HTTP, HTTPS, FTP, DHCP, DNS, DDNS, RTP, RTSP, RTCP, PPPoE, NTP, UPnP, SMTP, SNMP, IGMP, 802.1x, QoS, IPv6
|
|
Lens
|
1. Focal Length: 22 - 750mm, 200 mil electrical focus (Optional: 12.5 - 750mm lens);
2. HD infrared correction: Optical IR correction design, diurnal focus;
3. Auto aperture: support;
4. Night-day wide spectrum: 0.4-0.75um visible broad spectrum window and 0.8-0.95um NIR narrow spectrum window with day-night independent double-pass window to improve the signal-to-noise ratio of imaging light and stray light.
5. Preset position: precision potentiometer, DC5V, zoom focusing feedback
6. Interface: C/CS
|
|
Penetrate fog (Optional)
|
Optical filtering and AFR optoelectronic enhanced image processing technology, color penetrate fog
|
|
LPR (Optional)
|
Avoid strong light, license plate recognition
|
|
Housing
|
|
1. Material: Integral aluminum alloy housing, sealed and waterproof;
2. Structure: integration double window design;
3. Window glass: 4mm microcrystalline infrared high-efficiency transparent HLIN optical glass, transmittance > 98%;
4. Surface spraying: PTA three-resistance coating, anti corrosion (optional);
5. Temperature control: The whole system adopts thermal balance design + wide temperature electronic and optoelectronic devices, with built-in heating and heat dissipation components, which can work in low temperature and high temperature environment.
6. Weather proof: IP66, water-proof, dust-proof;
7. Connector：Aviation Water-Proof Connector.
|
|
PT
|
|
1. Load duty：50kg CNC Pan-Tilt;
2. Pan: 0 - 360° continuously，Tilt: +45°～-45°
3. Rotation speed：Pan: 0.01～30°/S，Tilt: 0.01～15°/S, support with lens focus speed adaptive function;
4. Preset: 255 preset, support lens zooming and focus preset;
5. Accuracy: ±0.1°;
6. Cruise Line-Scan: support 6 cruise line, 1 apple-skin scan, 1 line scan;
7. Watching: Pre-positioning/Automatic Cruise Route/Automatic Scanning Route
8. Power-off memory: support (restoring pre-power-off position, preset point status, cruise status, line-scanning status)
9. Azimuth Information: Support angle query, return and positioning;
10. Zero correction: support for north-to-zero remote correction function.
11. Power consumption: about 120W
12. Weight: 23kg
|
|
Enhancements (Optional)
|
|
1. Auto-focus tuning: support remote auto-focus precision parameter adjustment, adapt to different scenarios;
2. Day and night cruise: D/N cruise with different preset groups, day cruise 1 - 40 preset, night cruise 41 - 80 preset, according to the photosensitive status will automatically D/N switching, adapt to different space-time scenarios;
3. Temperature Compensation: TCS automatic rear focus compensation function, adapts to a wide range of high and low temperature changed environment, the rear focus remained clear always;
4. Remote Maintenance: Support the remote upgrade of embedded programs, convenient for after-sales maintenance;
5. Wipers: (Optional: built-in wipers);
6. Window cleaning: (Optional: external small sprinkler, self-storage water, freezing without damage, won’t affect the camera’s function);
7. Lens Servo: (Optional: Lens Focus Field of View Return/Location Function);
8. Extension module: (Optional: extended functions such as GPS, laser ranging, etc.);
9. Extended interface: (RS422/485 and analog video can be reserved, azimuth data can be returned for radar, GIS linkage positioning, or third-party intelligent analysis);
10. Optical network: (Optional: built-in fiber module, single mode fiber output, improve anti-jamming)
|
|
Intelligence Function (Optional)
|
- Regional intrusion detection support;
- Border-Crossing intrusion detection support;
- Panoramic stitching;
- Radar linkage;
- Auto-tracking support;
- Multi-scene group cruising support;
- 3D zooming/positioning selection;
(The above functions need to be implemented in conjunction with general software and network modules)
|
|
Other Specifications
|
|
Protocol
|
- Network interface: RJ45. 10/100 Base-T adaptive (integrated video output and RS485 control)
- Network protocol: TCP/IP, UDP, IPv4/v6; support HTTP, RTP, RTSP, NFS, DHCP, NTP, SMTP, SNMPv1/v2c/v3, UPNP, PPPoE, DNS, FTP; support PSIA, ONVIF2.0, GB28181
- Support Onvif 2.0 a
- Pelco-P、Pelco-D baud rate 2400、4800、9600、19200(optional)
- Power supply: AC/DC24V, Anti-reverse connection protection
- Interface：aviation waterproof connector.
|
|
Environmental
index
|
1. Working temperature: - 25 ~60 (- 40 Optional);
2. Storage Temperature: -45 ~+70;
3. Humidity: <90%;
4. Seismic resistance: 0.2g (in accordance with GB/T15211-2013 5.4 harsh grade 2);
5. Impact resistance: 15g (in accordance with GB/T15211-2013 5.3 harsh grade 3);
6. Lightning protection: built-in surge protection interface circuit, 4000V power supply, 2000V signal;
7. Salt spray prevention: continuous spray for 96 hours at pH 6.5 to 7.2, no change in surface.
8. Protection Level: IP66
|
|
Total Weight
|
≤45kg (PT included)
|
|
Total Consumption
|
180W
|
