| KEY SPECIFICATIONS |
| Product Family | 9000 Series |
| Band | Ka-Band |
| LO Type | PLL |
| # of onboard LOs | Triple-band |
| LO Stability | +/- 25 kHz |
| Noise Figure | 1.5 dB |
| Input Frequency - Band 1 | Ka-Band: 17.30 - 18.30 GHz |
| Input Frequency - Band 2 | Ka-Band: 18.30 - 19.30 GHz |
| Input Frequency - Band 3 | Ka-Band: 19.30 - 20.20 GHz |
| Output Frequency 1 | L-Band: 950 - 1950 MHz |
| Output Frequency 2 | L-Band: 950 - 1950 MHz |
| Output Frequency 3 | L-Band: 950 - 1850 MHz |
| |
| RF SPECIFICATIONS |
| LO Frequency 1 | 16.35 GHz |
| LO Frequency 2 | 17.35 GHz |
| LO Frequency 3 | 18.35 GHz |
| Control Signal 1 | 13 V |
| Control Signal 2 | 18 V |
| Control Signal 3 | 13V + 22 KHz tone |
| Phase Noise @ 1KHz offset | -70 dBc/Hz |
| Phase Noise @ 10KHz offset | -80 dBc/Hz |
| Phase Noise @ 100KHz offset | -90 dBc/Hz |
| Conversion Gain | 58 dBm min |
| Gain Variation over operating band | 4.0 dB p-p |
| Input VSWR | 2.0 : 1 |
| Output VSWR | 2.0 : 1 |
| Spurious | -60 dBc (in band) ; -50 dBc (out of band) |
| Output P1dB compression point | 5 dBm |
| Image Rejection | 40 dBc min |
| |
| ELECTRICAL SPECIFICATIONS |
| Current Drain | 350 mA |
| |
| INTERFACE SPECIFICATIONS |
| RF Input Connector | WR-42 waveguide grooved |
| RF Output Connector | N-50 Ohm |
| |
| M & C SPECIFICATIONS |
| LED Indicators | None |
| |
| ENVIRONMENTAL SPECIFICATIONS |
| Temperature - Operational | -40 to +60°C |
| Humidity | 0 - 95% |
| |
| PHYSICAL SPECIFICATIONS |
| Dimensions (L x W x H) | 133 x 70 x 39 mm |
| Weight | 500 g |
