TYPICAL SPECIFICATIONS |
Power Output (P1dB)
|
50W |
Noise Figure 15 dB
|
15 dB |
Phase noise |
-72 dBc/Hz at 1 KHz
-82 dBc/Hz at 10 KHz
-92 dBc/Hz at 100 kHz
-102 dBc/Hz at 1 MHz |
Fwd Monitor (15 dB Range)
|
+ 0.25 dB |
Conversion gain
|
65 dB min |
Gain variation over Frequency band
|
6 dB max |
Gain variation over any 40 MHz
|
2 dB max |
Gain variation over temperature |
3 dB max |
Spurious @ rated power
|
-55 dBc |
AM/PM Conversion @2dB below
power |
2.5°/dB rated |
2nd Harmonic @ 3dB below rated power |
-45 dBc |
|
|
INTERFACES |
Input VSRW
|
1.5:1 |
Output VSRW
|
2.0:1 |
RF Input connector
|
N-Type Standard, F/SMA Optional |
RF Output connector |
WR-75 |
|
|
MONITOR & CONTROL |
Discrete Mute Control Voltage ranges
|
|
Low
|
0 -0.8 V |
High
|
3.0 - 5.0 V |
- Fully programmable
|
|
- Mute enable can be high or low
|
|
- Mute default can be enabled or disabled
|
|
Thermal shutdown control threshold
|
+85°C |
Temperature Monitor Accuracy
|
+ 3°C |
Monitor/Control Connector |
MIL-26482 Series 1
receptacle
Shell size 12, 10 pins |
|
ENVIRONMENTAL & PHYSICAL |
Operating Temperature
|
|
baseplate internal temp. in component
configuration
|
-40 to +70°C (-40° to +158° F) |
ambient air in fan-cooled configuration |
-40 to +60°C (-40° to +140° F) |
Storage Temperature |
-54 to +105°C (-65° to +221° F) |
Outline dimensions
|
|
with integrated power suppy
|
133.4 L x 80.0 W x 82.6 H mm /
(5.25 “ x 3.15” x 3.25”)
|
With supply & fan cooling |
168.9 L x 86.4 W x 157.7 H mm /
(6.65 “ x 3.4” x 6.21”) |
Weight
|
|
With integrated power supply |
1.58 kg (3.50 lbs) |
With supply & fan cooling |
2.27 kg (5.0 lbs) |
|
|
POWER |
Power Input
power
with integrated power suppy
|
20 - 56 VDC |
Power Consumption with cooling fans
|
|
• 305W @ Psat
• 265W @ P1dB
• 235W @ 3dB backoff from P1dB
• 210W @ Quiescent (no signal input)
• 25W muted
|
|
Power Connector
|
MIL-26482 Series 1 recepticle
Shell size 12, 4 pins |
Optional AC Power |
|
|
|
Technical Specifications Diagram |
|
|
|
Compliance Standard |
Inquire |
|