VIKING ASC 300C Beacon Tracking Receiver C-диапазон (3,4-4,2 ГГц)

Приемник слежения за маячками VIKING ASC 300C с диапазоном C (от 3,4 до 4,2 ГГц)

Viking SATCOM - ведущий производитель и дистрибьютор коммерческих спутниковых антенн только для приема. Viking Satcom предлагает подход «единого окна», предлагая и поставляя современные спутниковые антенны. Полная линейка продуктов, систем связи и аксессуаров доступна по выгодным ценам.

Модель: VIKING_ASC300C

Цена по запросу

VIKING ASC 300C Beacon Tracking Receiver C-Band (3.4 to 4.2 GHz)



Summary
VIKING ASC 300C Beacon Tracking Receiver C-Band (3.4 to 4.2 GHz) The Model ASC 300-C Beacon Tracking Receiver is a high performance unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. VIKING ASC 300C Feature: • C Band Satellite Beacon Receiver • Input Frequency: 3.4 to 4.2 GHz • Ethernet and Continuous Digital Streaming Options • Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. • Applications: Antenna Tracking Controllers/Uplink Power Controllers

VIKING ASC 300C Beacon Tracking Receiver C-Band (3.4 to 4.2 GHz)

SYSTEM SPECIFICATIONS

Input Frequency Internal Block Converter	3.4 to 4.2 GHz
Pre-detection Bandwidth Other Bandwidths Available	60 kHz Standard
Input Level For full tracking range capability	-90 dBm, minimum; -30 dBm, maximum
Frequency Tuning	10 kHz Steps
Frequency Adjust	Front Panel or Remotely
AFC	+ 30 kHz
Threshold	<45 dB-Hz (C/N0) for acquisition
Input Impedance	50 Ohm
Input Connector	Type-N, Female
Output Impedance	100 Ohm, single ended
Output Connector	Terminal plug and BNC Female
Tracking Gradient	0.5 V/dB, Standard
Tracking Response	0 to +10 VDC for a 20 dB input level change
System Level Adjust	60 dB, 0.5dB Steps
Frequency Stability	< 1 ppm, 0c to +50 c
Frequency Reference	10 MHz (Internal)
Phase Noise	> 75 dB-Hz, 1 kHz from Carrier
Alarms	Unit Lock
Alarm Relay	Form-C
External LNB Power	None
CDS (OPTIONAL)	RS-232 or RS422 DB-9 female Connector on rear
Front Panel Display	Vacuum Fluorescent
M & C	RS-232 or RS- 422/485 Switchable on rear panel
M & C Connector	DB-9, Female on rear
Ethernet 10/100 Base T	(OPTIONAL) Not installed on STD unit
Ethernet Connector	RJ-45 on rear

MECHANICAL SPECIFICATIONS

Size	1.75" H X 16.00" D X 19.00" W
Weight	9lb. (4.08 kg)
Primary Power	0 - 264 VAC 47 - 63Hz, 1.4 A Auto-Sensing

ENVIRONMENTAL PERFORMANCE

Operating Temperature	0c to +50 c
Storage Temperature	-40c to +70 c
Humidity	95% RH @ 40 c

NOTES

CDS Continuous Digital Streaming Option:
The streaming option associated with the ASC300LW Beacon Receiver provides a continuous, two byte, data stream running at 9600 baud that contains twelve bits of signal strength level indication as well as lock or alarm condition of the unit. Other baud rates are available. A female DB9, interface connector on the rear of the unit is specifically dedicated for this option.

Ethernet Option: Not installed on STD Units. Must be installed at factory.
Software Support: Windows 98/2000/XP/2003/VISTA/7 32bit & 64bit
Protocol: TCP/IP, UDP, HTTP, SNMP, ARP, Telnet, ICMP, BOOTTP, DHCP, SMTP

Compliance Standard

Inquire

VIKING ASC 300C Beacon Receiver Datasheet (352.64KB)