VIKING ETI-ADH-NETCOM-NEMA (23483) Автоматический осушитель воздуха с коммуникацией Ethernet для наружного и мобильного применения Переменного тока

Автоматический осушитель воздуха VIKING ETI-ADH-NETCOM-NEMA (23483) с Ethernet-связью для наружных и мобильных приложений Питание от сети переменного тока

Viking SATCOM - ведущий производитель и дистрибьютор коммерческих антенн для спутниковой связи. Viking Satcom предлагает подход «единого окна», предлагая и поставляя современные спутниковые антенны. Полная линейка продуктов, систем связи и аксессуаров доступна по выгодным ценам.

Модель: VIKING_ETI-ADH-NETCOM-NEMA_23483

Цена по запросу

VIKING ETI-ADH-NETCOM-NEMA (23483) Automatic Air Dehydrator with Ethernet Communications for Outdoor & Mobile Applications AC Power

Summary

VIKING ETI-ADH-NETCOM-NEMA (23483) Automatic Air Dehydrator with Ethernet Communications for Outdoor & Mobile Applications

The ADH NETCOM automatic dehydrator supplies low pressure dry air to keep waveguide and coaxial cable dry. Output pressure is configurable between 0.10 psig and 7.50 psig (7mbar – 517mbar) in 0.01 psig (0.67mbar) increments. Factory default pressure is 0.5 psig (34.5mbar). Operational monitoring and alarms are software based making them highly configurable in the field. Future software features can be installed while in service over the internet or local Ethernet network.

The ADH NETCOM automatic dehydrator is Ethernet network ready. Units can be configured and monitored using either built in SNMP support or the web interface. Legacy system support is provided via RS-422/485 or RS-232 interfaces. Three programmable alarm relays are also included. Communicated operational information includes output pressure, duty cycle, temperature, compressor hours and air drying canister status.

The ADH NETCOM automatic dehydrator uses a brushless dual-diaphragm pump for long life. Dehydrator operates with exceptionally low noise and vibration levels. The air drying canisters use aluminum oxide desiccant for high efficiency. The humidity sensor signals for regeneration based upon current dew point rather than at fixed time intervals for additional energy savings and long desiccant life.

The ADH NETCOM NEMA automatic dehydrator provides the same functionality as a standard ADH NETCOM in an environmentally sheltered IP66, NEMA 4X enclosure. It is ideal for use with mobile satellite antenna installations and for outdoor mounting for pressurization systems localized to the antenna pedestal. This outdoor configuration is also ideal for use in pressurization systems in remote locations such as along rail lines, pipe lines and at power distribution substations. While the NEMA enclosure keeps out moisture, the temperature control system allows operation down to –40°F (–40°C) The ADH NETCOM NEMA automatic dehydrator weighs just 24 lbs (10.9 kg).

VIKING ETI-ADH-NETCOM-NEMA Automatic Air Dehydrator Features:

•	Provides dry pressurized air to ensure signal quality of antenna waveguide and dielectric coaxial cable
•	Highly configurable to meet the needs of wide ranging applications
•	Programmable operating pressure range: 0.10 psig - 7.50 psig (7mbar - 517mbar)
•	Brushless compressor for long life
•	Future-proof software based features allow updates and upgrades while in service
•	Remote monitoring and control with web interface or SNMP
•	Configurable Master/Slave operation
•	Ethernet, RS-422/485, RS-232 and alarm relay outputs
•	Durable, light weight IP66, NEMA 4X enclosure
•	Designed to allow minimal ﬂex without damaging enclosure or components for mobile and other high vibration applications
•	Optionally available with military style connectors
•	Low energy use minimizes operational costs

Technical Specifications Diagram

See "Technical Specifications" Tab

VIKING ETI-ADH-NETCOM-NEMA (23483) Automatic Air Dehydrator with Ethernet Communications for Outdoor & Mobile Applications AC Power

GENERAL

Approvals	UL, CE
Regeneration Method	Automatic, demand
Maximum dew point	-40˚ F/C

ENCLOSURE

Type	Hoffman® POLYPRO® Polyester Type 4X
Cover Attachment	Hinged, lockable
Protection	IP66, NEMA 4X
Dimensions	15.31″ × 18.06 ” × 9.25 ” (389mm × 459mm × 235mm)

Entries
1 x 0.88″ (22mm)	entry for supply power
2 x 0.63″ (16mm)	entry for dry pressurized air and condensate discharge

Weight	24 lbs (10.9 kg)
Mounting	Wall, post/pole or shelf mounted

POWER

Supply	100-240 VAC, 50/60 Hz
Maximum current	1.0 Amps at 100 V
Power usage	40 W typical, 100 W max

OUTPUT

Flow rate	25.4 scfh (12 lpm)
Maximum pressure	7.5 psig (517mbar)
Internal safety relief valve	8 psig (552mbar)
Discharge port	1/8″ NPT / 3/8″ or 1/4″ hose barb (both included)
Display units	SI (millibars); English (psig), default

CONTROL

Protocols	HTTP (Web Interface), SNMP, UDP, TFTP
Maximum pressure	Confi gurable Range: 0.20 psig – 7.5 psig (14mbar – 517mbar), Default: 0.50 psig (34.5mbar)
Minimum pressure	Confi gurable Range: 0.10 psig – 7.4 psig (7mbar – 510mbar), Default: 0.30 psig (21mbar)
Low pressure alarm level	User Configurable, Default: 0.15 psig (10mbar)
High pressure alarm level	User Configurable, Default 1.5 psig (103.5mbar)
Alarm relays	Contact Type – Form C, SPDT, reverse acting Ratings – 0.25 Amps @ 60 V User configurable, Defaults: Alarm Relay 1: Summary Alarm Alarm Relay 2: Low Pressure Alarm Alarm Relay 3: Over Pressure Alarm
Duty cycle alarm	User configurable, Default: 50%
Master/Slave configuration	User configurable, Default: Standard/Slave

ENVIRONMENTAL

Operating temperature	−40°F to 130°F (0°C to 55°C)
Storage temperature	−40°F to 150°F (−40°C to 60°C)

Diagrams

VIKING ETI-ADH-NETCOM-NEMA (23483) Automatic Air Dehydrator with Ethernet Communications for Outdoor & Mobile Applications Mechanical Diagram Drawing

Compliance Standard

Inquire

VIKING ETI-ADH-NETCOM-NEMA Datasheet (355.43KB)