Network ETI Tracon FPT 130
- Adjustable temperature set point of 30 °F, 38 °F, 45 °F, or 50 °F (−1.1 °C, 3.3 °C, 7.2 °C, or 10 °C) for various freeze protection applications
- Can use an NEC Class 2 temperature sensor with up to 2,000 ft. cable for enhanced installation options
- Thermistor temperature sensor with 20 ft. cable included for applications of −40 °F to 230 °F (−40 °C to 110 °C)
- Ground–Fault Equipment Protection with manual and automatic test function
- Alarms for excess ground fault current, low load current, and temperature
- Alarms indicated with panel LED lights and relay contact for remote signaling
- A Fault Mode setting which can be set to energize or de-energize the heaters during a sensor fault
- Fire Protection Mode maintains heater operation for use in critical fire protection systems
- Durable weather–resistant NEMA 4X IP66 enclosure permits indoor or outdoor installation
The FPT 130 Heat–Trace Control is a single–point microprocessor–based heat–trace control thermostat. It is ideal for applications which require Ground–Fault Equipment Protection (GFEP). Ideal uses include freeze protection, and other temperature monitoring and control applications. The FPT 130 Heat–Trace Control operates from the heater’s power source. A universal power supply allows the FPT 130 to operate from 100 V ac to 277 V ac, and control a resistive load up to 30 A.
- Adjustable Temperature Setpoint and Alarms Sensor Inputs
- Precision Monitoring and Control
- Ground–Fault Equipment Protection
- Automatic GFEP Circuit Self–Test
