CableFree Solar Offline POE Solutions
CableFree Solar Offline Power solutions are used on sites where ac mains power is either unavailable or unreliable, to ensure highly reliable connectivity for virtually any wireless broadband network, including Radio, Microwave, FSO, MMW and WiFi access points.
The Solar Offline Power range combines advanced offline power controllers, high efficiency solar panels and batteries with flexible choice of options to facilitate a wide range of applications. A variety of power options are available for different regions and power requirements.
This solution is designed to speed deployment and time to market ensure reliable connectivity for all applications.
CableFree outdoor power systems are designed for applications that require a primary off-grid power source to run various electronics. The sealed and weatherproof enclosures have a generous amount of space inside and a removable mounting plate for mounting all types of customer electronics. All enclosures are hinged and gasket sealed. The PL enclosure can accept a padlock or tamper seal. The ST enclosure is equipped with 2 tamper proof closures that are operated by a special key (included).
The enclosures can be mounted to a wall or pole with the included mounting bracket system. The high quality solar panels have a 25year power output guarantee. The 5W and 10W solar panels are mounted directly to the DC enclosure saving space and making a more convenient assembly. The 30W and 60W solar panel can be mounted to a 2" to 4" diameter pole or alternately to a wall with the included bracket kit.
Features include an advanced battery charge controller to protect against over-charging or over-discharging of the valve regulated sealed lead acid batteries. Other choices of battery are available including Lithium Ion (Li-Ion). The PL and ST systems include a controller with built in POE inserter and DCDC converter to supply up to 48V POE from the 12V battery system. Enclosures have multiple ports for CAT5 cable, antenna cables/connectors or other cabling. They are vented to prevent residual buildup of hydrogen gas. Batteries in the DC and PL enclosures are an Advance Glass Matt (AGM) type which have good all temperature performance. The ST enclosure uses a high performance GEL battery which gives the best available deep discharge and temperature performance.
A wind turbine can be added to any system by mounting the turbine to a pole and installing the wind turbine controller into the enclosure. The wind turbine controller and solar controller hook up to the batteries in a parallel fashion.
