GeoSat Microwave Low Noise Block (17,2-22,2GHz) KA-Band 5 LO PLL with W/G Isolator (LNB) | Model GLKA5LOXI
- Input frequency 1 - 17.20 - 18.20 GHz
- Input frequency 2 - 18.20 - 19.20 GHz
- Input frequency 3 - 19.20 - 20.20 GHz
- Input frequency 4 - 20.20 - 21.20 GHz
- Input frequency 5 - 21.20 - 22.20 GHz
- L.O (GHz), Switching - 16.25, 17.25, 18.25 , 19.25, 20.25
- Built-in Isolator
- depends on ext. ref.
Section |
Item |
Specification |
Band 1 | Input (GHz) | 17.20 - 18.20 |
Output (MHz) | 950 - 1950 | |
L.O (GHz), Switching | 16.25 @13V | |
Band 2 | Input (GHz) | 18.20 - 19.20 |
Output (MHz) | 950 - 1950 | |
L.O (GHz), Switching | 17.25 @13V & 22KHz | |
Band 3 | Input (GHz) | 19.20 - 20.20 |
Output (MHz) | 950 - 1950 | |
L.O (GHz), Switching | 18.25 @18V | |
Band 4 | Input (GHz) | 20.20 - 21.20 |
Output (MHz) | 950 - 1950 | |
L.O (GHz), Switching | 19.25 @18V & 22KHz | |
Band 5 | Input (GHz) | 21.20 - 22.20 |
Output (MHz) | 950 - 1950 | |
L.O (GHz), Switching | 20.25 @22V | |
Noise figure | 2.0 dB max. (with isolator) | |
Conversion gain at -40 to +60℃ | 60 dB typ. (55dB min, 65dB max) | |
Gain flatness | 4 dBp-p max. (each band) | |
Gain flatness at -40 to +60℃ | 5 dBp-p max. (each band) | |
Gain ripple at per 27MHz, -40 to +60℃ | 1 dBp-p max | |
L.O stability at -40 to +60℃ | depends on ext. ref. | |
Image rejection | 40 dBc min. @Band 1 | |
10 dBc min. @Band 2 | ||
0 dBc min. @Band 3, 4, 5 | ||
Phase noise | -70 dBc/Hz (@1 KHz) | |
-80 dBc/Hz (@10 KHz) | ||
-95 dBc/Hz (@100 KHz) | ||
Output P1dB | +10 dBm min. | |
Ext. ref. input freq. & power | 10 MHz, -5 to +5 dBm | |
Ext. ref. input port | IF output connector | |
Input VSWR | 1.5 : 1 max. | |
Output VSWR | 2.2 : 1 max. | |
Input waveguide flange | WR-42 | |
Output connector | F, N-type female (option) | |
Power supply | +12 to +24V DC | |
Required current | 450 mA max. | |
Operating temperature | -40 to +60℃ | |
Waterproof | IP 67 | |
Dimension (exclude connector) | 66.8 x 38.4 x 139.6 mm | |
Weight | 560 g |