MECHANICAL SPECIFICATIONS |
|
|
Az/El Drive |
Motorized AvL Zero Backlash Cable Drive (Patent Pending) |
Polarization Drive System |
Motorized Rotation of Feed
|
Reflector Construction |
1.4m Segmented Carbon Fiber |
|
|
Axis Travel ▼ |
|
Azimuth |
±200° |
Elevation (reflector boresight) |
5° - 100° of reflector boresight from calibrated inclinometer (El range may vary depending upon CFE) |
Polarization |
±95° |
|
|
Az/El Speed: ▼ |
|
Slewing/Deploying (typical) |
2°/sec Elevation: 1°/sec |
Peaking (typical) |
0.2°/sec |
|
|
Motors |
24 VDC Variable Speed, Constant Torque |
|
|
Standard Interfaces: ▼ |
|
BUC Mounting |
Feed boom or behind reflector (additional CFE case or optional case required) |
RF |
Std. 50 ohm Coax (2) at base, cover flange at feed Tx port |
Electrical |
30 ft. cable with connectors for controller |
|
|
Manual/Emergency Drive |
Handcranks for Az and El, Knob on Pol axis |
|
|
Transit Configuration (Ku-band): ▼ |
|
Two rugged, weather-resistant plastic cases, total weight 260 lbs. (typical) |
Positioner |
27” x 20” x 22”, 110 lbs. max, 100 lbs. typical |
Outriggers/Feed Boom/Reflector |
43” x 28” x 21”, 150 lbs. max (Includes Ku or Ka Feed), 140 lbs. typical |
Additional Feeds |
43” x 28” x 21”, 70 lbs typical, dependent on feed options selected |
|
|
Set-up Time |
Less than 15 minutes. |
|
|
ENVIRONMENTAL SPECIFICATIONS |
|
|
Wind – Survival |
80 mph in zenith position
|
Wind - Operational: ▼ |
|
Without Anchoring |
30 mph |
With Anchoring |
30 mph gusting to 40 mph |
|
|
Pointing Loss in Wind: ▼ |
|
Ku-band |
0.1 dB typical, 0.5 dB max |
Ka-band |
0.3 dB typical, 1.0 dB max |
X-band |
0.1 dB typical, 0.2 dB max |
|
|
Temperature: ▼ |
|
Operational |
-22° to 125° F (-30° to 52° C) |
Survival |
-40° to 140° F (-40° to 60° C) |
|
|
RF / ELECTRICAL SPECIFICATIONS |
Receive |
Transmit |
|
|
|
Feed Type ► |
Opt. 2-Port X (Military/WGS) (1.4m Reflector) |
|
|
|
Frequency Range (GHz) |
7.25 - 7.75 GHz |
7.9 - 8.4 GHz |
Polarization Configuration |
RHCP or LHCP |
Gain (mid-band) @ Horn Interface (dBi) |
37.6 dBi (less opt. filter) |
38.1 dBi (less opt. filter) |
-3dB Beamwidth (mid-band) |
2.3° |
2.1° |
Antenna Noise Temperature (midband) |
52° K |
|
Radiation Pattern Compliance |
MIL-STD-188-164A |
Maximum Feed Transmit (Tx) Power |
|
1000 watts per port |
VSWR |
1.30:1 |
1.30:1 |
G/T with 50˚ LNB, midband, clear horizon |
17.3 dB/°K with 55ºK LNB |
|
Axial Ratio (CP only, within pointing cone ) |
1.21 dB |
2.0 dB |
Port-to-Port Isolation – Tx to Rx |
115 (includes optional filter) |
115 (includes optional filter) |
|
|
CONTROLLER SPECIFICATIONS: STANDARD |
|
|
Controller Type ► |
Std. Auto-Acquire with Opt. Ethernet IP Interface
|
Standard Feature ▼ |
|
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
|
|
|
Integration |
Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S) |
User Interface |
Menu-driven display w/ keypad |
Input Power |
115/230 VAC (at rack); up to 200W |
Software Upgrades/Options |
Inclined orbit tracking (using step-track or TLE track); automatic band sensing |
|
|
CONTROLLER SPECIFICATIONS: OPTIONAL |
|
|
Controller Type ► |
Opt. Enhanced Auto-Acquire with Ethernet IP Interface
|
Standard Feature ▼ |
|
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
|
|
|
Integration |
Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available) |
User Interface |
Intelligent/simple GUI for on-board or remote CFE laptop |
Input Power |
28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W |
Software Upgrades/Options |
Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing |
|
|
Available Options, Upgrades & Services |
|
Optional: • Standard Configuration: Case-Based • Optional Configuration: Tripod • BUC/HPA mounting • Stabilization leg options • Waveguide interconnect options • Beacon Receiver and Inclined Orbit Tracking Mode • Ku-band Mode Matched Feed (Eutelsat) • Ku-band Co-pol Kit • DBS, Commercial Ka Feeds (future)
|
|
|
Technical Specifications Diagram |
Inquire |
|
|