MECHANICAL SPECIFICATIONS |
|
|
Az/El Drive |
Motorized AvL Zero Backlash Cable Drive (Patent Pending) |
Polarization Drive System |
Motorized Rotation of Feed
|
Reflector Construction |
2.0m Segmented 9-piece Carbon Fiber |
|
|
Axis Travel ▼ |
|
Azimuth |
±200° |
Elevation (operational) |
0° - 90° with ±200° Az Travel |
Polarization (LP feeds) |
±95° Adjustable within <1° |
|
|
Az/El Speed: ▼ |
|
Slewing/Deploying (typical) |
2°/sec Elevation: 1°/sec El |
Peaking (typical) |
0.2°/sec |
|
|
Motors |
24 VDC Variable Speed, Constant Torque |
|
|
Standard Interfaces: ▼ |
|
BUC Mounting |
Feed boom or behind reflector (additional CFE case or optional case required) |
RF |
Std. 50 ohm Coax (2) at base, cover flange at feed Tx port |
Electrical |
30 ft. cable with connectors for controller |
|
|
Manual/Emergency Drive |
Handcranks for Az and El, Knob on Pol axis |
|
|
Transit Configuration: ▼ |
|
Three rugged, weather-resistant plastic cases, total weight: 450 lbs. |
2020 Motorized Positioner |
26" x 24" x 30", 170 lbs |
Outriggers/Feed Boom/Ku or Ka Feed |
71” x 18” x 19”, 110 lbs. (includes Ku or Ka feed) |
Reflector Panels |
38” x 38” x 22”, 170 lbs. |
Additional Feeds |
43” x 27” x 20”, 70 lbs. typical, dependent on feed options selected (optional) |
Set-up Time |
Less than 15 minutes. |
|
|
ENVIRONMENTAL SPECIFICATIONS |
|
|
Wind – Survival |
80 mph in zenith position
|
Wind - Operational: ▼ |
|
Without Anchoring |
30 mph |
With Anchoring |
30 mph gusting to 45 mph |
|
|
Pointing Loss in Wind: ▼ |
|
Ku-band |
0.1 dB typical, 0.5 dB max |
Ka-band |
1.0 dB typical, 2 dB max |
|
|
Temperature: ▼ |
|
Operational |
-22° to 125° F (-30° to 52° C) |
Survival |
-40° to 140° F (-40° to 60° C) |
|
|
RF / ELECTRICAL SPECIFICATIONS |
Receive |
Transmit |
|
|
|
Feed Type ► |
Std. 2-Port Precision Ku DBS bands available upon request |
|
|
|
Frequency Range (GHz) |
10.95 - 12.75 |
13.75 - 14.50 |
Polarization Configuration |
Orthogonal Linear, Optional Copol Linear |
Gain (mid-band) @ Horn Interface (dBi) |
46.0 dBi |
47.6 dBi |
VSWR |
1.30:1 |
|
-3dB Beamwidth (midband) |
0.9° |
0.7° |
Antenna Noise Temperature (midband) |
54° K |
|
Radiation Pattern Compliance |
FCC 25.209, ITU-R S.580-6, IESS 208 |
Maximum Feed Transmit (Tx) Power |
|
500 watts per port |
G/T with LNB, midband |
25.7 dB/° K (with 50° K LNB) |
|
|
|
|
Cross-Polarization Isolation: ▼ |
|
|
On-axis within pointing cone |
35 dB |
35 dB |
Within pointing cone |
Std: 28 dB MM: 25 dB |
Std: 30 dB MM: 35 dB |
Linear Cross-Pol Isolation (in pointing cone) |
option |
option |
Feed Port Isolation – TX to RX (dB) |
35 |
80 (includes filter) |
|
|
|
|
|
CONTROLLER SPECIFICATIONS: STANDARD |
|
|
Controller Type ► |
Std. Auto-Acquire with Opt. Ethernet IP Interface
|
Standard Feature ▼ |
|
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
|
|
|
Integration |
Embedded w/ Handheld, incl. Shelf-Mount P/S (optional 1RU w/ front-panel keypad + integral P/S) |
User Interface |
Menu-driven display w/ keypad |
Input Power |
115/230 VAC (at rack); up to 200W |
Software Upgrades/Options |
Inclined orbit tracking (using step-track or TLE track); automatic band sensing |
|
|
CONTROLLER SPECIFICATIONS: OPTIONAL |
|
|
Controller Type ► |
Opt. Enhanced Auto-Acquire with Ethernet IP Interface
|
Standard Feature ▼ |
|
Fully-automatic satellite acquisition, with automatic azimuth, elevation and cross-polarization peaking; includes on-board, one-button deploy/acquire interface for pre-configured systems; includes on-board GPS, electronic compass, level sensors and auto-compensation; customer-configurable satellite list. Note: Beacon Receiver or Modem as acquisition signal source may be required for non-commercial satellites
|
|
|
Integration |
Embedded w/ Ethernet IP Interface (P/S optional) (optional rack-mount P/S available) |
User Interface |
Intelligent/simple GUI for on-board or remote CFE laptop |
Input Power |
28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; up to 200W |
Software Upgrades/Options |
Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing |
|
|
Available Options, Upgrades & Services |
|
Optional: • BUC/HPA mounting • Optional 75 ohm coax • Waveguide interconnect options • Beacon receiver – inclined orbit tracking – resolvers/upgrade • Grounding options (lightning conductor) • Anchoring kit options • Custom logo on reflector face (1- or 2-color; per AvL Logo Policy) • Controller options – see above • Spare parts kit
|
|
|
Technical Specifications Diagram |
Inquire |
|
|