Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget
![Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget](https://www.iktechcorp.com/image/cache/catalog/product/foxcom_gold_l-band_gl7230_optical_link_800-500x500.jpg "Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget")
Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget
• High Input Power (-10 to –30dBm)
• 10Km Transmission Distance
• Selectable AGC/MGC
• Front Panel Test Port
• Powerful Monitoring Features
• Compatible with all 1st Generation Sat-Light Products
Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget
![Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget](https://www.iktechcorp.com/image/content/foxcom_gold_l-band_GL7230_optical_link_666.jpg) |
||
Summary |
||
Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget Foxcom's Sat-Light/Gold L-Band Interfacility Link offers a high performance, cost effective alternative to conventional coaxial-cabled systems. Sat-Light/Gold L-Band IFL covers the range of 950 to 2200MHz. The Gold Series L-Band link is designed for a wide range of satellite uplinking facilities whereby high input power levels are required. Foxcom’s high dynamic range DFB laser delivers exceptional signal quality for the most demanding of uplink applications. The new Sat-Light Gold series is compatible with first generation Sat-Light 7000 Series platform. The Gold Series support L-Band, 70/140MHz IF, Wide Band (10-2200 MHz), 10MHz Reference, Redundancy, M & C, SNMP, Ethernet, and Serial Data Communication. The link consists of a high input power optical transmitter, which receives the RF signal from an L-band modem, and an optical receiver that connects to the antenna BUC. All satellite modulation schemes are accommodated –digital or analog. Inherently low phase is achieved by direct modulation of the laser diode.
|
||
| Order Diagram - Options | ||
 |
||
Foxcom Gold GL 7230 RF Optical UpLink L-Band [950-2220MHz], 4dB Optical Budget
| RF Specifications | Units | Typical | Minimum | Maximum |
| Frequency Range | MHz | 950-2150MHz | ||
| Link Gain | dB | Adjustable | -10 | +10 |
| Amplitude Response @ Unity Gain 950-2150MHz any 36 MHz |
dB | ±2 ±0.25 |
±2.2 ±0.3 |
|
| Gain Stability | dB/24hr | ±0.25 | ±0.3 | |
| SFDR1 | dB/Hz2/3 | 103 | 100 | |
| CNR [any 36 MHz]1 | dB | 54 | 52 | |
| Noise Figure (NF)2 | dB | 18 | 21 | |
| Output IP3 (OIP3) 3 | dBm | +15 | ||
| Third Order InterModulation [IMD]4 | dBc | Adjustable | 55 | 40 |
| Group Delay Variation- linear 950 - 2150MHz |
ns | 4 |
5 |
|
| Input Signal Range - Total Power | dBm | -30 | -5 | |
| RF Output Signal Range - Total Power | dBm | -25 | 0 | |
| Maximum Input without Damage | dBm | +15 | ||
| Input/Output Impedance | 75 or 50 | |||
| TX/RX Input/Output return loss 50 Ohm 75 Ohm |
dB | -14 -12 |
-14 -12 |
|
| RF Connector Type Input/Output Test Port |
F, SMA BNC |
|||
| Test Port [front panel sample port] | dB | -20 | -22 | -18 |
| Optical Specifications | Unit | Typical | Minimum | Maximum |
| Optical Power Output | dBm | 3 | 1 | 4 |
| Optical Budget / Distance 4 dB optical budget |
dB/Km | 1310 nm | 1550 nm 8 |15 |
||
| Optical Connector Types | FC/APC or SC/APC | |||
| Optical Wavelength | nm | 1310/1550/CWDM | ||
| Electrical Specification | ||||
| Supply Voltage | Vdc | 13 | 12.7 | 18 |
| Supply Current [TX]5 | Amps | 0.4 | ||
| Supply Current (RX) | Ampls | 0.3 | ||
| Physical Specifications | ||||
| Operating Temperature Range | -10 | +55 | ||
| Dimensions [D×W×H] | ||||
| MTBF | Hours | TX: 309, 481 RX: 359, 057 |
||
1. 0dBm RF input, unity gain, IMD=-40 dBc @ 1 meter Fiber |
||||