Welcome to IK Tech Corporation
Your one stop for all your satelite needs

NJRC_NJR2937EN New Japan Radio PLL LNB (10,95 to 11,70 GHz) Low Noise Block External Reference N-Type Connector

NJRC_NJR2937EN New Japan Radio PLL LNB (10,95 to 11,70 GHz) Low Noise Block External Reference N-Type Connector

New Japan Radio NJRC NJR2937EN PLL LNB (10.95 to 11.70 GHz) Low Noise Block External Reference N-Type Connector

IKtechcorp is the distributor for New Japan Radio Company (NJRC), a leading manufacturer and supplier of commercial satellite equipment. NJRC/JRC offers a wide range of Block Up Converters (BUCs), Low Noise Blocks (LNBs) and Low Noise Amplifiers (LNAs)

• RF Frequency: 10.95 to 11.70GHz
• Low Noise Figure: 0.8 dB
• Connector Option: N-Type, Female (50 ohm) 
• Small Size & Light Weight
• RoHS Compliance

Product Code: NJRC_NJR2937EN
$285.00

New Japan Radio NJRC NJR2937EN PLL LNB (10.95 to 11.70 GHz) Low Noise Block External Reference N-Type Connector

New Japan Radio NJRC NJR2937EN PLL LNB (10.95 to 11.70 GHz) Low Noise Block External Reference N-Type Connector Product Picture, Image, Price, Pricing
 

Summary

For more than 50 years, NJRC has kept their position as the leading manufacturer of Microwave Components in the market worldwide. NJR BUCs and LNBs have set the standards in price, performance and reliability for many years. All of the NJRC Microwave Components supplied are of JAPAN origin. All NJRC BUCs and LNBs, etc feature the RoHS compliance.

 

Summary of Features:  
   
RF Frequency 10.95 to 11.70GHz
IF Frequency 950 MHz to 1,700 MHz
Local Frequency 10.00 GHz
Input Interface Waveguide, WR75 (with Groove)
Output Interface N-type, female (50 ohm)
Noise Figure (at +25 C) 0.8 dB typ., 1.0 dB max
Conversion Gain (at +25 C) 55 dB min., 60 dB typ.
Input Voltage +24 VDC (+12 to +24 VDC)
Current Drain 200 mA max
Weight 260 g [0.57 lbs]
   
Technical Specifications Diagram  
See "Technical Specifications" Tab

New Japan Radio NJRC NJR2937EN PLL LNB (10.95 to 11.70 GHz) Low Noise Block External Reference N-Type Connector

 

TYPICAL SPECIFICATIONS

   
RF Frequency 10.95 to 11.70GHz
IF Frequency 950 MHz to 1,700 MHz
Local Frequency 10.00 GHz
Input Interface Waveguide, WR75 (with Groove)
Output Interface N-type, female (50 ohm)
Noise Figure (Ta.: +25 C) 0.8 dB typ., 1.0 dB max.
Linear Gain (Ta.: +25 C) 60 dB typ., 55 dB min.
   
Requirement for External Reference  
Input Port IF Output connecter
Frequency 10 MHz (sine-wave)
Input Power -10 to 0 dBm @ Input port
   
Phase Noise
@ 100 Hz -135 dBc/Hz max.
@ 1 kHz -143 dBc/Hz max.
@ 10 kHz -145 dBc/Hz max.
   
L.O. Phase Noise
@ 100 Hz -75 dBc/Hz max.
@ 1 kHz -80 dBc/Hz max.
@ 10 kHz -85 dBc/Hz max.
@ 100 kHz -95 dBc/Hz max.
   
Leakage Level  
at the IF Output Connector -25 dBm max.
at the RF Input Flange -60 dBm max.
   
Spurious
Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). -140 dBm max.at input
With test CW signal -10 dBm IF output (Measured at specified IF band). -55 dBc max.
   
Input V.S.W.R. 2.5 : 1 typ.
Output V.S.W.R. 2.3 : 1 typ.
Power Requirement +24 VDC (+12 to +24 VDC)
Current Drain 200 mA max.
   
Mechanical & Environmental  
Temperature Range (ambient) -40 to +60 C (operating)
-40 to +80 C (storage)
Dimension & Housing
(without Interface Connectors)
100.5 mm (L) x 40 mm (W) x 40 mm (H)
[3.96" (L) x 1.57" (W) x 1.57" (H)]
Weight 260 g [0.57 lbs]
 

Technical Specifications Diagram

 

New Japan Radio NJRC NJR2937EN PLL LNB (10.95 to 11.70 GHz) Low Noise Block External Reference N-Type Connector Mechanical Diagram Drawing

 

Compliance Standard

Inquire