TYPICAL SPECIFICATIONS
|
|
|
RF Frequency |
12.25 to 12.75 GHz |
IF Frequency |
950 MHz to 1,450 MHz |
Local Frequency |
11.30 GHz |
Input Interface |
Waveguide, WR75 (with Groove) |
Output Interface |
N-type, female (50 ohm) |
Noise Figure (Ta.: +25 C) |
0.8 dB typ., 1.0 dB max. |
Linear Gain (Ta.: +25 C) |
60 dB typ., 55 dB min. |
|
|
Requirement for External Reference ▼ |
|
Input Port |
IF Output connecter |
Frequency |
10 MHz (sine-wave) |
Input Power |
-10 to 0 dBm @ Input port |
|
|
Phase Noise |
|
@ 100 Hz |
-135 dBc/Hz max. |
@ 1 kHz |
-143 dBc/Hz max. |
@ 10 kHz |
-145 dBc/Hz max. |
|
|
L.O. Phase Noise |
|
@ 100 Hz |
-75 dBc/Hz max. |
@ 1 kHz |
-80 dBc/Hz max. |
@ 10 kHz |
-85 dBc/Hz max. |
@ 100 kHz |
-95 dBc/Hz max. |
|
|
Leakage Level |
|
at the IF Output Connector |
-25 dBm max. |
at the RF Input Flange |
-60 dBm max. |
|
|
Spurious |
|
Fixed frequency spur, unrelated to test CW signal (Measured at specified IF band). |
-140 dBm max.at input
|
With test CW signal -10 dBm IF output (Measured at specified IF band). |
-55 dBc max. |
|
|
Input V.S.W.R. |
2.5 : 1 typ. |
Output V.S.W.R. |
2.3 : 1 typ. |
Power Requirement |
+24 VDC (+12 to +24 VDC) |
Current Drain |
200 mA max. |
|
|
Mechanical & Environmental ▼ |
|
Temperature Range (ambient) |
-40 to +60 C (operating) -40 to +80 C (storage) |
Dimension & Housing (without Interface Connectors) |
100.5 mm (L) x 40 mm (W) x 40 mm (H) [3.96" (L) x 1.57" (W) x 1.57" (H)] |
Weight |
260 g [0.57 lbs] |