Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget
![Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget](https://www.iktechcorp.com/image/cache/catalog/product/foxcom_if-band_pl7330t_pl7330r10_rf_link_10db_optical_800-500x500.jpg "Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget")
![IKtechcorp 是Foxcom Communications Fiber Optic Systems 的分销商，商业卫星设备的领先制造商和供应商。Foxcom 提供广泛的光纤链路，用于 VSAT、DTH、COTM、电信、电缆和广播行业。卫星、DTH、VSAT、光学、光纤，射频。”/></p> • IF 频段：10–200 MHz<br /> • 超过 25 公里的距离[使用 PL7330T1550 为 40 公里]<br /> • 通过前面板 LCD 和机架安装的 SNMP 提供强大的管理功能<br /> • 用户控制和设置所需的 IMD 级别<br /> • 各种射频和光连接器<br /></div>
<div class=](/image/catalog/media/foxcom_logo.jpg){kind=logo}
Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget
![Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget](/image/content/foxcom_if-band_PL7330T_PL7330R10_rf_link_10dB_optical_666.jpg) |
||
| Summary | ||
| Foxcom Platinum IF Band PL7330T [PL7330T1550]/PL7330R10 Link High Power Input, 10dB Optical Budget Foxcom’s Platinum IF products are designed to meet the increasing demand for modularity and high-performance in a small form factor for superior long-distance transmission. With high RF input power and wide dynamic range, the link is designed to provide full specification service up to a full 4 dB optical budget with thePL7330R4 and 10 dB optical budget with the PL7330R10 receiver. Utilizing Foxcom’s DigiRF technology, the user has full control of all important functions for setup, operation, and analysis via the front panel LCD or via the associated subrack SNMP capability. In addition IMizer, an automated adjustable link calibration embedded system enables the user to align the RF links IMD/CNR to specific linearity performances without a two-tone test. Select the desired IMD for the optical transmitter, either locally or remotely, IMizer automatically adjusts the laser drive to meet the IMD requirements. Each low profile individual transmitter or receiver can be “hot swapped” in the subrack chassis maintaining a best subsystem uptime capability. Each module contains an individual processor to maximize specification performance at all times under demanding user applications. The PL7330T transmitters and PL7330R4/R10 receivers are designed for subrack chassis mounting. The associated Platinum chassis, model PL7010, has 12 active slots, one main control processor (MCP) slot and two redundant power supplies. No fans are required even under full subrack loading and full LNB powering. | ||
| Order Diagram - Options | ||
 |
||
Foxcom Platinum IF Band PL7330T [PL7330T1550] / PL7330R10 Link High Power Input, 10dB Optical Budget
| RF Specifications | Units | Typical | Minumum | Maximum |
| Frequency Range - Bandwidth | MHz | 10 - 200 | - | |
| Amplitude Response @any Unity Gain 10 – 200 MHz any 36 MHz |
dB |
±0.25 ±0.2 |
. | ±0.25 ±0.2 |
| Gain Stability | dB/24hr | ± 0.2 | ± 0.25 | |
| Gain Variation over temperature | dB | -2 | 2 | |
| SFDR1 | dB/Hz | 103 | ||
| SFDR2 | dB/Hz | 99 | ||
| DR (Dynamic Range - single channel)3 | dB | 30 | ||
| CNR [any 1 MHz] 2 | dB | 70 | 67 | 73 |
| Noise Figure (NF)1 | dB | 27 | 30 | |
| Noise Figure (NF)2 | dB | 13 | 15 | |
| Output IP3 (OIP3)4 | dBm | - | +15 | +20 |
| Group Delay Variation- linear @ 10 to 30 MHz 30 to 200 MHz |
ns | <3.0 <1.0 |
||
| Input/Output Impedance | Ohm | 50 or 75 | ||
| 1 dB Compression Point | dBm | 2 | 3 | |
| Phase Noise5 | None | |||
| Third Order InterModulation [IMD]6 | dBc | -55 | -40 | |
| Input Signal Range - Total Power | dBm | -30 | -5 | |
| Maximum Input without Damage | +15 | |||
| Output Signal Range - Total Power7 | dBm | -30 | -5 | |
| TX/RX Input/Output Return Loss 50 Ohm 75 Ohm |
dB | -18 -17 |
-18 -17 |
|
| Test Port [front panel sample port]8 | dB | -20 | -22 | -18 |
| RF Connector Input/Output Test Port |
Type | F, SMA, BNC, N |
||
| Optical Specifications | Units | Typical | Minimum | Maximum |
| Optical Wavelength | nm | 1310/1550/CWDM | ||
| Optical Power Output | mW/dBm | 2 / 3 | 1.7/2.5 | |
| Optical Budget / Distance 10 dB optical budget |
dBm/km | 1310 nm | 1550 nm 25 | 40 |
||
| RX Optical Input Power | dBm | -7 |
-8 |
+1 |
| Optical Connector Types | Type | FC/APC or SC/APC (E2000 option) |
||
| Optical Return Loss | dB | -60 | -55 | |
| Electrical Specifications | ||||
| Supply Voltage | Vdc | 12 | ||
| Supply Current [TX]9 | Amps | 0.35 | ||
| Supply Current (RX) | Amps | 0.45 | ||
| EMI Rating | EMI Rating: FCC Class B CE Mark |
|||
| Physical Specifications | ||||
| Operating Temperature Range | ºC | -10 | +55 | |
| Storage Temperature Range | ºC | -45 to +85 | -45 | +85 |
| Relative Humidity | 95% non-condensing | |||
| Altitude | ft / Km | 10,000 [3.08 ] operating10 14,000 [12.2] non-operating |
||
| Dimensions [D×W×H] | ins/cm | 12×0.8×4 / 30.5×2×10.2 | ||
| Weight | lbs./Kg | 0.5 / 0.23 | ||
| MTBF | Hours | TX: 309,481 RX: 359,057 |
||
| MTTR | Hours | 0.083 | ||
| Shock & Vibration | Designed for normal transportation environment per section MIL-STD-810E. Designed to withstand 20G at 11 ms [½ sine pulse] in non-operating configuration. |
|||
1. -5 dBm RF input, link gain = 0 dB, IMD=-40 dBc @ 0 dBm optical input - max. RF input |
||||