Foxcom Gold GL7330 RF Optical Link IF [70-140MHz], 4dB Optical Budget

Foxcom Gold GL7330 射频光链路中频 [70-140MHz]，4dB 光预算

IKtechcorp 是以下产品的经销商Foxcom Communications Fiber Optic Systems，商业卫星设备的领先制造商和供应商。Foxcom 提供广泛的光纤链路，用于 VSAT、DTH、COTM、电信、电缆和广播行业。卫星、DTH、VSAT、光纤、光纤，射频。”/></p> • 10Km 传输距离<br /> • 可选 AGC/MGC<br /> • 前面板测试端口<br /> • 强大的监控功能<br /> • 兼容所有第一代卫星光产品</div>

<div class=

型号: Foxcom_GL7330

打电话问价

Foxcom Gold GL7330 RF Optical Link IF [70-140MHz], 4dB Optical Budget



Summary
Foxcom Gold GL7330 RF Optical Link IF [70-140MHz], 4dB Optical Budget Foxcom's Sat-Light/Gold 70/140MHz IF Link offers a high performance, cost effective alternative to conventional coaxial-cabled systems. Sat-Light/Gold L-Band IFL operates from range of 10 to 200MHz. The Gold Series L-Band link is designed for a wide range of satellite up and downlinking facilities whereby high CNR levels are required. Foxcom’s high dynamic range DFB laser delivers exceptional signal quality for the most demanding of applications. The new Sat-Light Gold series is compatible with first generation Sat-Light 7000 Series platform.The Gold Series support L-Band, 70/140MHz IF, Wide Band (10-2200 MHz), 10MHz Reference, Redundancy, M & C, SNMP, Ethernet, and Serial Data Communication. The link consists of a high input power optical transmitter, which receives the RF signal from an IF modem, and an optical receiver that connects to the antenna BUC. All satellite modulation schemes are accommodated –digital or analog. Inherently low phase is achieved by direct modulation of the laser diode.

Order Diagram - Options

Foxcom Gold GL7330 RF Optical Link IF [70-140MHz], 4dB Optical Budget

RF Specifications	Units	Typical	Minimum	Maximum

Frequency Range	MHz	10-200MHz
Link Gain	dB	Adjustable	-10	+10
Amplitude Response @ Unity Gain 10-200MHz any 36 MHz	dB	±0.4dB ±0.3dB		±0.5dB
Gain Stability	dB/24hr	±0.25		±0.3
SFDR1	dB/Hz2/3		100
CNR [any 36 MHz]1	dB	60	57
Noise Figure (NF)2	dB	18		21
Output IP3 (OIP3) 3	dB	+20	+15
Third Order InterModulation [IMD]4	dBc	Adjustable	55	40
Group Delay Variation- linear 10 to 25 MHz 25 - 200MHz	ns	5 1
Input Signal Range - Total Power	dBm		-30	0
RF Output Signal Range - Total Power	dBm		-25	0
Maximum Input without Damage	dBm		+15
Input/Output Impedance	75 or 50
TX/RX Input/Output return loss 50 Ohm 75 Ohm	dB	-15 -12		-15 -12
RF Connector Type Input/Output Test Port		F, SMA BNC
Test Port [front panel sample port]	dB	-20	-22	-18


Optical Specifications	Unit	Typical	Minimum	Maximum

Optical Power Output	dBm	3	1	4
Optical Budget / Distance 4 dB optical budget	dB/Km	1310 nm \| 1550 nm 8 \|15
Optical Connector Types		FC/APC or SC/APC
Optical Wavelength	nm	1310/1550/CWDM


Electrical Specification

Supply Voltage	Vdc	13	12.7	18
Supply Current [TX]5	Amps	0.4
Supply Current (RX)	Ampls	0.3


Physical Specifications

Operating Temperature Range			-10	+55
Dimensions [D×W×H]
MTBF	Hours	TX: 309, 481 RX: 359, 057

1. 0dBm RF input, unity gain, IMD=-40 dBc @ 1 meter Fiber 2. -20dBm input, 20dB Gain, IMD 40 @ 1 meter fiber 3. 0dBm RF Output, IMD=-40dBc 4. User adjustable 5. Under 10ºC add 120 mA [laser heating]

Foxcom Gold GL7330 RF Optical Link Datasheet (467.72KB)