AvL 1014 1,0m Manual or Motorized FlyAway SNG Compact Portable Antenna Ka-Band Commercial

AvL 1014 1.0m 手动或电动 FlyAway SNG 轻型紧凑型便携式天线标准 2 端口精密 Ka 波段商用

“IKtechcorp
• Rx/Tx Feed：2 端口 Ka-Band Commercial
- 接收：17.7 - 20.2 GHz
- 传输：27.5 - 30.0 GHz
• 航空公司可托运
• 主要特点
- 单箱 <70 磅。<62” 周长
- 可选电动
- 5 分钟设置
- 三频功能的可互换馈送

型号: avl_1014_ka_com

打电话问价

AvL 1014 1.0m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ka-Band Commercial



Summary
AvL 1014 1.0m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ka-Band Commercial AvL’s 1.0m Manual FlyAway Antenna System weighs less than 70lbs when packed and is compact enough to fit into one airline checkable, IATA-compliant case. The robust carbon fiber reflector is rugged enough for operations in harsh conditions. The antenna’s tripod base can be anchored, and the entire antenna assembles in 5 minutes. AvL’s Manual FlyAway Antennas are lightweight, compact, portable, and robust with carbon fiber reflectors and easy-to-assemble tripods. AvL’s Az/El positioners feature easy pointing as well as fine-tuning, and are easy and quick to assemble. As with all AvL antenna systems, the Manual FlyAway Antennas interface with any modem, RF electronics, or satellite service, and achieve pointing accuracy and pointing stability even in the most extreme conditions. AvL 1014 Ka-Band Manual or Motorized FlyAway SNG Antenna feature: • Robust 1.0m segmented 8-piece carbon fiber reflector and tripod base for operations in harsh conditions • Lightweight, compact and portable in one airline checkable IATA compliant case • Fast interchangeable feed system with tri-band capability: Ku, Ka and X; DBS capable • Feed rotation for polarization • Easy pointing and fine-tuning Az/El positioner • Manual actuators enable full range of motion • Optional motorization for 60cm, 85cm and 1.0m • Easy-to-assemble tripod base can be anchored • Single- or multi-band options for worldwide operation • Prime focus offset optics with global mode-matched feed • Manual actuators enable full range of motion • Quick set-up operational in minutes • Interface with all types of RF electronics and services • Numerous packaging options including backpacks and rugged cases

Technical Specifications Diagram
Inquire

AvL 1014 1.0m Manual or Motorized FlyAway SNG Lightweight Compact Portable Antenna Standard 2-Port Precision Ka-Band Commercial

MECHANICAL SPECIFICATIONS

Az/El Drive	Manually-driven fine and coarse adjustment (visual scales standard)
Polarization Drive System	Manual rotation of feed (visual scales standard)
Reflector Construction	1.0m segmented 8-piece carbon fiber
*Axis Travel*: ▼
Azimuth	360 degree continuous
Elevation	0-90°
Polarization	±90°

*Az/El Speed*: ▼
Slewing/Deploying (typical)	2°/second
Peaking (typical)	0.2°/second
Motors	Optional
Tx Input @ Feed	Waveguide flange (cover)
Rx Input @ Feed	Waveguide flange (cover)
BUC Mounting	Contact Sales
Controller Interface	Optional - one 30-ft. cable with connector from base connector panel to controller
Manual/Emergency Drive	Three-lobe knob for manual adjustment standard
Size and Weight	<70 lbs packed in one airline checkable case (less than 62” girth)

ENVIRONMENTAL SPECIFICATIONS

Wind - Survival	Deployed: 60 mph (97 kph) (ballasted); Stowed: 90 mph (145 kph)
Wind - Operational	30 mph (48 kph), Gusts to 45 mph (72 kph)
*Pointing Loss in Wind (Ka RX)*: ▼
With optional controls and/or motors	1.4 dB typical / 2.0 dB max

*Temperature:* ▼
Operational	-22°F to 125°F (-30°C to 52°C)
Survival	-40°F to 140°F (-40°C to 60°C)

RF / ELECTRICAL SPECIFICATIONS	Receive	Transmit

*Feed Type* ►	Opt. 2-Port Ka-Band Commercial**
Frequency Range (GHz)	17.7 - 20.2*	27.5 - 30.0**
Polarization Configuration	Circular (opt. linear feed available)

Gain (mid-band)	43.9 dBi	47.4 dBi
-3dB Beamwidth (mid-band)	1.3˚	0.9˚
Radiation Pattern Compliance	FCC 25.209, ITU-R S.580-6
Maximum Feed Transmit (Tx) Power		250 watts
Antenna Noise Temperature (midband)	107˚ K
G/T, midband, clear horizon	20.5 dB/˚ K (100˚ LNB)
Axial Ratio (Ka and X only, within pointing cone)	1.5 dB	1.0 dB

VSWR	1.30:1	1.30:1
Feed Port Isolation - Tx to Rx (dB)	35 dB	80 dB (incl. filter)

CONTROLLER SPECIFICATIONS

*Controller Type* ►	Optional AvL AAQ – Motorized or Computer-Assisted Pointing (CAP)
	Enhanced Auto-Acquire with Std. Ethernet IP Interface
Integration	Embedded w/ Ethernet IP interface (P/S optional) (optional rack- or shelf-mount P/S available)
User Interface	Intelligent/simple GUI for on-board or remote CFE laptop
Input Power	28V DC (at antenna positioner); optional 115/230 VAC rack-mount power supply; 250W
Software Upgrades/Options (Motorized)	Inclined orbit tracking (using step-track, memory track, or TLE track); automatic band sensing

Available Options, Upgrades & Services

• Upgrade from 2-Port Precision Ku Feed to: a) 2-Port Enhanced Cross-Pol (Mode-Matched) Ku; b) 2-Port X MIL; c) 2-Port Ka MIL; d) 2-Port Ka Comm.
• Add co-polarization Kit (for 2-port Ku feeds only) - configures Rx and Tx to same polarization sense ) (may require second case) 
• Add BUC/HPA mounting (NOTE: minimum elevation may be restricted by these options) ) (may require second case)
• Upgrade to custom RF/IF I/O cabling configurations available
• Custom colorization (contact factory for available colors)
• Add custom logo on reflector face (1- or 2-Color; per AvL Logo Policy)
• Upgrade from standard manual pointing to AvL AAQ Enhanced Auto-Acquire (see Controller section, above, for some of these options) (may require second case)
• Add power supply for AAQ Controller upgrade (requires second case)
• Spare parts kit * Outside main beam
** Contact Sales for commercial Ka-band frequency range options and circular or linear polarization options.
*** Excluding optional filters

Technical Specifications Diagram

Inquire

Compliance Standard

Inquire

AVL 1014 Antenna Datasheet (257.04KB)