|
Option 1: Uncooled Thermal Camera
|
|
Detection
|
Vehicle:13000m
|
|
Human:4800m
|
|
Identification
|
Vehicle:3400m
|
|
Human:1300m
|
|
Sensor
|
5th generation uncooled focal plane array VOx Detector
|
|
Resolution
|
640 × 512 pixel
|
|
Spectral range
|
7.5～14μm
|
|
NETD
|
50mK (@25℃ F1.0)
|
|
Focal length
|
31 - 155mm, 0.45 - 0.09mrad
|
|
Field of view(horizontal)
|
20° × 15° - 4°× 3°
|
|
Len Control
|
|
1. Zooming: Motorize Zoom.
2. Focusing: Manual/Auto Focus (3A adaptive active focusing algorithm, supports multiple trigger modes with high precision and speed).
3. Optical machine: 3CAM mode and AS+DOE optical structure, high infrared over transmission, zoom process without virtual focus, smaller axis.
|
|
Image processing
|
|
1. Image enhancement: SDE digital image processing.
2. Pseudo colour polarity: 16 pseudo color and B/W, B/W conversion.
3. Image parameter: AGC automatic gain control, brightness and contrast.
4. Digital zoom: 2X, 4X digital amplification.
5. NUC Correction: Auto/Manual correction, background correction.
6. Hot-points analysis: support multiple hot-points box show alarm function.
|
|
Visible Camera (Compulsory)
|
|
Camera
|
|
1. Surface: 1/1.8'' Star Level CMOS, Integrated ICR Dual Filter D/N Switch;
2. Resolution: 2 million pixels, 1920 x 1080
3. Illumination: 0.002Lux high sensitive colour, 0.0002Lux black and white;
4. Encoding: H.265/H.264/MPEG4/MIPEG video format, supporting multi-stream;
5. Video Bit Rate: 32Kbps-16Mbps, 60Hz 30 frames/second
6. Support SD card local storage, support regional invasion, cross-border invasion, face detection, audio anomaly detection, alarm linkage;
7. Supports AFR fog penetration, electronic anti-shake, strong light suppression, 3D digital noise reduction, anti-infrared overexposure, ABF automatic rear focus adjustment function
|
|
Lens
|
|
1. Focal Length: 22 - 750mm, 200 mil electrical focus (Optional: 12.5 - 750mm lens);
2. HD infrared correction: Optical IR correction design, diurnal focus;
3. Auto aperture: support;
4. Night-day wide spectrum: 0.4-0.75um visible broad spectrum window and 0.8-0.95um NIR narrow spectrum window with day-night independent double-pass window to improve the signal-to-noise ratio of imaging light and stray light.
5. Preset position: precision potentiometer, DC5V, zoom focusing feedback
6. Interface: C/CS
|
|
Fog Penetration
|
Optical filtering and AFR optoelectronic enhanced image processing technology, color penetrate fog
|
|
Laser (Optional)
|
|
Laser Light Source
|
|
1. Consumption: 15W;
2. Wavelength: 810nm;
3. Laser angle: 0.5°～20°;
4. Encapsulation: the illuminator is sealed with inert gas to prevent oxidation;
5. Using distributed laser design, laser emitter and high-temperature components are directly affixed to the shell’s cooling fins, that have stronger heat dissipation capability if compared with the modular laser.
|
|
Laser Lens
|
|
1. Lens form: 60X f1.2-80mm ultra-short focal zoom patented technology, laser 600 micron cross-section imaging lens;
2. Transmittance: multi-layer NIR Anti-reflective coating, high efficiency laser coupling;
3. Homogenization: GHT-II super homogenization HD illumination patented technology, full focus spot brightness equilibrium is > 92%;
4. Laser Safety: Using ZQB safety laser beam processing patented technology, which complying with International IEC60825 Safety Standard;
5. Focus Angle Positioning: Precision digital drive positioning.
Spot form: (Optional: elliptical spot illuminator - the spot always keeps elliptic in the process of change, better matching with 16:9 HD camera picture, where the laser utilization rate increased by 30%)
|
|
Angle & Distance Matching
|
|
1. Matching method: Automatic tracking or manually fine-tuning intelligent matching method;
2. Synchronization control: DSS digital stepping illumination angle control technology, 0.1 degree precise servo control;
3. Response time: Z-super laser angle and imaging ratio matching algorithm, tracking response time less than 500 ms;
4. Synchronization effect: Laser synchronization effect adjusts the modes of cut-in, cut-out and full-screen coverage, which can be set arbitrarily according to the scene remotely.
5. Optical axis alignment: SLM double optical axis self-locking alignment device, the accuracy can reach 0.01 degrees, reserve external alignment window, without cover removal maintenance
|
|
Laser Switch
|
1. Control mode: Mandatory opening, mandatory closing and photosensitive automatic control, can be set remotely.
2. Photosensitive synchronous control: independent photosensitive control circuit, precise synchronous switching of laser switch and camera into day-night mode.
3. Data Processing: Built-in Intelligent Anti-Strong Light Jamming Algorithms, Shielding the False Switches Caused by Strong Light at Night
|
|
Other Enhancement Functions (Optional)
|
|
Laser Rangefinder
|
1. Measuring range: 50 - 3000m OR 50 - 5000m OR 100 - 8000m;
2. Accuracy: ±3m;
3. Frequency: 0.2Hz;
4. Wavelength: 1570nm (eyes safe);
5. Interface: RS422.
|
|
GPS/BeiDou
|
1. Positioning Accuracy: Position <5m, Speed <0.1m/s;
2. Timing: 1us;
3. Sensitivity: -159dBm;
4. Positioning Information Update Frequency: 1Hz;
5. Output Interface: TTL, NMEA0183 protocol;
6. Weight: 127g
|
|
Electrical Compass
|
- Heading Accuracy: 0.5° (@Tilt＜40°), 0.7°RMS (@Tilt＜60°), 1°RMS (@Tilt＜80°), precision repeatability: 0.1°;
- Tilt Accuracy: 0.1°;
- Rooling Accuracy: 0.1° (@＜80°);
- Resolution: 0.01°;
- Tilt Margin: ±80°;
- Correction: Hardware/software/Tilt calibration;
- Weight: 180g.
|
|
PTZ
|
|
Shape
|
1. Wind resistant: Dome Shape housing, multi-dimension free-form surface, small wind resistance, strong vibration resistance, resisting to 33m/s wind.
2. Upper & lower parts’ separation design, separate packaging and delivery independently, fast integration.
3. Upper & lower dual-windows design, able to carry two different sensors at the same time.
|
|
Rotation Range
|
1. Pan: N x 360° continuous spin, mechanical locking after power failure/power-off.
2. Tilt: -90°～+90°
3. Tilt possesses software stroke limit function, through program setting.
|
|
Rotation speed
|
1. Pan: 0.01°～80°/S;
2. Tilt: 0.01°～60°/S;
3. Acceleration: pan 100°/s2, Tilt 100°/s2
4. Speed adaptation: with intelligent induction speed change function, support lens focus speed adaptive function.
5. Speed mode: highest speed mode setting.
6. Driving mode: drive with high torque rare earth permanent magnet synchronous motor, high-speed start-stop, smooth linkage tracking with radar
|
|
Positioning Accuracy
|
1. Accuracy meet 0.02°, drive with High Frequency Fine Tuning Pulse Precision Motor, Digital Angle Sensor Servo;
2. Position Timing: less than 4s.
|
|
Platform Zero-Point
|
1. Null-point setting: support PT null-point setting;
2. Auto north-pointing: Pan support to auto north-pointing function (build-in gyroscope seeking for north).
3. Auto zero setting: Tilt support auto zero setting.
4.
|
|
Cruise Scanning
|
1. Preset: NOT less than 255 preset;
2. Path scanning: support preset cruising, day/night navigation, line-scanning, apple-skin scanning, with scanning speed setting.
3. Watch function: support watch preset/line-scanning/cruising/apple-skin scanning.
|
|
Data Return
|
1. Lens Servo: Support lens field of view, magnification, ZOOM/FOCUS value query, return and positioning functions;
2. Turntable Angle: Support real-time/query-return and positioning functions for horizontal and pitch angles.
|
|
Enhancement Features
|
1. Heating & defrosting: directional industrial window defroster, automatic heating temperature control;
2. Power-off memory: support to restore power-off status;
3. Motor Protection: Turntable Blocking Protection, High Reliability;
4. Fault Detection: Supporting Power-on Self-Detection, State Query and Fault Code Feedback;
5. Upgrade maintenance: remote restart, remote upgrade function, easy system maintenance.
|
|
Optional Functions
|
1. Wiper;
2. Optical Network;
3. Network power supply.
|
|
Environment Parameter
|
|
1. Operating temperature: -40 ~ +60;
2. Storage temperature: -45°～ +70°;
3. Humidity: <90%
4. Sealing: the whole machine is airtight (optional: sphere filled with nitrogen)
5. Lightning surge protection: 4000V power supply, 2000V communication video signal;
6. Salt-spray prevention: to C5-M level, at pH 6.5 to 7.2, continuous spray for 700 hours, still can work normally;
7. Anti-vibration: meet the environmental requirements of GJB150A.16 Truck-Highway Transportation environmental requirement;
8. Protection Level: IP66
|
|
Other Specifications
|
|
Interface
|
1. Network interface: 1-channel 10M / 100M adaptive Ethernet port (containing visible image + HD + RS422/RS485 control);
2. Power supply: 1-channel DC48V;
3. Military-grade waterproof aviation plug
|
|
Protocol
|
- Network Protocol: TCP/IP, UDP, IPv4/v6; support HTTP, RTP, RTSP, NFS, DHCP, NTP, SMTP, SNMPv1/v2c/v3, UPNP, PPPoE, DNS, FTP; support PSIA, ONVIF2.0, GB28181 network protocols;
- PTZ control protocol: Pelco-P, Pelco-D and other industry-standard protocol, baud rate 2400, 4800, 9600, 19200 alternative, proprietary protocols can be customized.
|
|
Environment Protection Certification
|
Used of environmental friendly material, in line with EU RoHS environmental friendly with no harmful substances standard.
|
|
Power supply
|
1. Power Supply: equipped with ultra-wide input power adapter,AC90V-305V turned DC48V.
2. Consumption: platform highest power consumption ≤500W, stable consumption ≤150W.
|
|
Weight
|
≤70KG (excluded cameras)
|
|
Dimension
|
Ф480mm×H825mm
|
|
Intelligence Function (Optional)
|
- Auto-tracking system;
- Anti-drone tracking system;
- Panoramic stitching;
- Radar linkage;
- Hot-point alert;
- Patrol detection;
- 3D zooming/positioning selection;
- Analysis: Invasion, leaving, straggling, retention, lingering, target trajectory.
(The above functions need to be implemented in conjunction with general software and network modules)
|
|
GPS (Optional)
|
|
1. Positioning accuracy <5 meters,
2. optional Compass positioning,
3. Speed Accuracy< 0.1m/s,
4. Sensitivity: -159dBm.
5. Location information update frequency: 1Hz
6. Output interface: TTL, NMEA0183 protocol
|
