SMW Quad-link Fiber System Receiver
特點
- 全Ku波段和雙極化
- 高交叉極化隔離
- 低相位噪聲滿足 DVB-S2 的廣播配置文件，可選的超低相位噪聲模型滿足 DVB-S2X 的所有配置文件，也推薦用於 NS4 調製
- 高 P1dB 和 IP3
- 在內部之間選擇參考。或外部參考。輸入模型
- 寬工作溫度範圍
- 低增益選項
Features
- 4x L-band forward channels + 10MHz return channel over a single fiber using a direct modulated 1550 nm
- laser and CWDM – Coarse Wavelength Division Multiplexing.
- AGC – Automatic Gain Control and optional Fixed Gain for large antennas and Beacon applications.
- Up to 40 km depending on link budget with very high C/N maintained.
- High P1dB and IP3
Fully outdoor proof
- Both the transmitter and the receiver unit packaged in a compact outdoor rugged aluminium enclosure.
- -40° to +80°C fully operating temp range.
- Highly rugged push on, quick connect, fiber connector on both units.
Versatility
- 4 x L-band fibre link in any direction simply by swapping location of the receiver/transmitter pair.
- Carries any 290 – 3000 (Opt. 50 – 2750) MHz RF signal – Satcom, Terrestial TV, GPS, FM etc
- Ideal to mount on the satellite antenna or structure, without using a bulky separate outdoor enclosure.
- Built in Bias-tees and 10MHz ref diplexer.
- Available with custom options.
Applications
- Single fiber connection to one Quattro LNB equipped satcom antenna
- Single fiber connection to 4 separate single or multiband LNB’s
- Single fiber connection to multiband or multiple BUC’s
Additional information
| Dimensions | 27.3 × 15.44 × 3.44 cm |
|---|---|
| RF frequency: | 290-3000 MHz, 50-2750 MHz |
| RF Connector: | SMA, F, N, Other |
| 10 Mhz ref: | SMA, None, Other |
| Options: | DC connector type, 10 MHz connector type, No LNB DC supply, 50 – 2750 MHz RF freq. range |
Drawing
