VIKING ASC 300Ku1-I Beacon Tracking Receiver with Internal Block Down Conveter Ku-Band (10,7 to 11,75 GHz)

VIKING ASC 300Ku1-I 信标跟踪接收器，带内部阻塞转换器 Ku 波段（10.7 至 11.75 GHz）

“IKtechcorp

Viking SATCOM 是商业卫星通信仅接收天线的领先制造商和分销商。Viking Satcom 通过提供和交付最先进的卫星天线提供“一站式”方法。以经济实惠的价格提供完整系列的产品、通信系统和配件。

型号: VIKING_ASC300Ku1-I

VIKING ASC 300Ku1-I Beacon Tracking Receiver with Internal Block Down Conveter Ku-Band (10.7 to 11.75 GHz)



Summary
VIKING ASC 300Ku1-I Beacon Tracking Receiver with Internal Block Down Conveter Ku-Band (10.7 to 11.75 GHz) The Model ASC300Ku1-I Beacon Tracking Receiver is a high performance self-contained unit that is designed to real time track the power density of a satellite beacon and output a DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. The ASC300Ku1-I will tune over Ku band satellites 10.7 to 11.75 GHz by utilizing an internal block down converter. The frequency band must be customer specified.15 VIKING ASC 300Ku1-I Feature: • Ku Band Satellite Beacon Receivers (Internal BDC) • Input Frequency: 10.7 to 11.75 GHz (#ASC300KU1-I) • Input Frequency: 11.7 to 12.75 GHz (#ASC300KU2-I) • Ethernet and Continuous Digital Streaming Options • Designed to real time track the power density of a satellite beacon and output a temperature stabilized DC voltage that is linearly proportional to the beacon power by utilizing a true, RMS-responding power detector. • Applications: Antenna Tracking Controllers/Uplink Power Controllers

VIKING ASC 300Ku1-I Beacon Tracking Receiver with Internal Block Down Conveter Ku-Band (10.7 to 11.75 GHz)

SYSTEM SPECIFICATIONS

Input Frequency	10.7 to 11.75 GHz
Pre-detection Bandwidth Other Bandwidths Available	60 kHz Standard
Input Level	-90 dBm, minimum; -30 dBm, maximum For full tracking range capability
Frequency Tuning	10 kHz Steps
Frequency Adjust	Front Panel or Remotely
Frequency Stability	<1 ppm,0c to +50c
AFC	+30 kHz
Threshold	<45 dB-Hz (C/N0) for acquisition
Input Impedance	50 Ohm
Input Connector	Type-N, Female Std. (SMA Optional)
Output Impedance	100 Ohm, single ended
Output Connector	Terminal Plug and BNC Female
Tracking Gradient	0.5 V/dB, Standard
Tracking Response	0 to +10 VDC for a 20 dB input level change
System Level Adjust	0 to 60dB,0.5dB Steps
Frequency Reference	10 MHz (Internal)
Phase Noise	>75 dBc-Hz, 1 kHz from Carrier
Alarms	Unit Lock
Alarms Relay	Form-C
External LNB Power	No External LNB Power
CDS (OPTIONAL)	RS-232 or RS-422 DB-9 female connector on rear
Front Panel Display	Vacuum Fluorescent
M & C	RS-232 or RS-422/485 Switchable on rear panel
M & C Connector	DB-9, Female on rear
Ethernet 10/100 Base T	(OPTIONAL) Not installed on STD unit
Ethernet Connector	RJ-45 on rear

MECHANICAL SPECIFICATIONS

Size	1.75" H X 16.00" D X 19.00" W
Weight	9 lb. (4.08 kg)
Primary Power	90 - 264 VAC, 47 - 63 Hz, 1.4A Auto-Sensing

ENVIRONMENTAL PERFORMANCE

Operating Temperature	0c to +50 c
Storage Temperature	-40c to +70 c
Humidity	95% RH @ 40 c

NOTES

CDS Continuous Digital Streaming Option:
The streaming option associated with the ASC300 series beacon tracking receiver provides a continuous, two byte, data stream running at 9600 baud that contains ten bits of signal strength level indication as well as lock or alarm condition of the unit. A female DB9, interface connector on the rear of the unit is specifically dedicated for this option.

Compliance Standard

Inquire

VIKING ASC 300Ku1-I Beacon Receiver Datasheet (359.4KB)